The Balaji Info Lube GPS Tracker 3.0 driver and software suite is a "Get the job done" tool. It is not pretty, it is not user-friendly, and the installation process requires a bit of tech-savvy patience. However, for the specific purpose of configuring Balaji GPS hardware, it is indispensable.
Quick Installation Guide for New Users:
If you are a fleet manager or an individual trying to set up a single device, this software works—just don't expect a modern app experience. It is strictly a utility belt tool for hardware management.
The Balaji USB GPS Receiver (Tracer 3.0) is a high-sensitivity, UIDAI-approved device primarily used for Aadhaar enrollment and identity verification. It is designed for simple "plug-and-play" operation with personal computers and supports Aadhaar 4.0 and 3.3 software. Driver Download & Installation
To ensure the device is recognized by your system, follow these steps to download and install the official drivers:
Download the Driver: Drivers are often provided via specific support channels. You can download them directly from RadiumBox or contact the Balaji Whatsapp Support at +91-9358409099.
Unzip the Folder: Locate the downloaded ZIP file and extract its contents using an archiver like WinRAR or 7-Zip. Run the Installer:
Open the extracted folder and run “driver-for-64bit.exe” (or the version matching your OS) as an Administrator.
Follow the on-screen prompts provided by the installation wizard.
Connect the Device: Plug the Balaji USB GPS into an available USB port. It can be extended up to 10 meters using a USB extension cable if needed. Restart & Configure: Restart your computer to finalize the installation.
In your enrollment software, set the baud rate to 9600 to ensure proper data transmission. Key Features of Tracer 3.0
UIDAI Certified: Specifically approved for Aadhaar enrollment tasks.
Fast Satellite Fix: Features high sensitivity for rapid location acquisition.
Status Indicators: Includes clear LEDs to indicate power and GPS signal status.
Safety Features: Built with a protection circuit to safeguard your laptop or PC from power surges.
Compact Design: Small, lightweight, and requires no external power supply, as it draws power directly from the USB port. Technical Specifications Brand Model Tracer 3.0 / Balaji USB GPS Receiver Connectivity USB Type-A Compatibility Windows 7, 8.1, 10, 11 (32/64-bit) Baud Rate Battery Life
N/A (USB Powered) / Up to 7 days standby for internal components
The Balaji Info Lube GPS Tracker 3.0 (often referred to as the Balaji USB GPS Receiver) is a specialized device widely used for Aadhaar enrollment and vehicle tracking. To ensure your computer recognizes the device, you must install the correct USB interface drivers. Official Driver Download and Installation
The manufacturer typically provides drivers through direct support channels rather than a public automated repository.
Direct Download: You can often find the driver file, such as "driver-for-64bit.exe", on the Balaji Receiver Product Page via a designated download button or by contacting their official WhatsApp Support at +91-9358409099.
Third-Party Repositories: For generic USB GPS chipsets used in these devices, you can find compatible drivers at Jellyfish Tele or Driver Scape. How to Install the Driver
Download and Unzip: Obtain the compressed folder and extract the contents using a tool like WinRAR.
Run as Administrator: Locate the setup.exe or driver-for-64bit.exe file, right-click it, and select "Run as Administrator".
Follow the Wizard: Progress through the on-screen prompts until the installation is complete.
Connect Device: Plug the Balaji GPS Tracker into your computer's USB port. It should be automatically detected. balaji info lube gps tracker 3.0 driver download
Reboot: Restart your PC to ensure all system changes are applied. Configuration for Aadhaar Software
If you are using the device for Aadhaar enrollment (UCL software), specific settings are required:
Baud Rate: Ensure the baud rate is set to 9600 within the software settings for proper communication.
Verification: Check the Windows Device Manager under "Ports (COM & LPT)" to confirm which COM port has been assigned to the receiver. Advanced Tracking Software
For those using the tracker for data logging and vehicle monitoring, you might consider GPS Tracker Data Logger 3.0, which is designed to collect data from various GPS hardware versions.
Balaji Info Lube GPS Tracker 3.0 (often referred to as the Balaji USB GPS Receiver) is a specialized device primarily used at Aadhaar enrollment centers across India. It is UIDAI-approved and essential for providing accurate location data for official registration software. Driver and Software Download To use the Balaji GPS Tracker
on a Windows PC, you must install the specific USB-to-serial drivers that allow the computer to communicate with the GPS chipset. Download Source
: Drivers can typically be obtained directly through specialized support channels. For the official driver package, users are often directed to contact official support via WhatsApp at +91-9358409099 Installation Steps Download the driver package (often a ZIP file). Unzip the folder and run the "driver-for-64bit.exe" (for 64-bit systems). Restart your computer to complete the installation. Alternative Drivers
: Since many of these devices use a standard Prolific or u-blox chipset, general drivers from sites like Driver Scape Jellyfish Telecommunication
may also be compatible if official Balaji drivers are unavailable. Jellyfish Telecommunication Configuration for Aadhaar/UCL Software
Once the driver is installed, the device must be correctly configured within your tracking or Aadhaar software: : Ensure the baud rate is set to in the software settings for the device to sync properly. : After installation, check the Windows Device Manager
under "Ports (COM & LPT)" to identify which Virtual COM Port has been assigned to the GPS receiver (e.g., COM4). Key Features of the Balaji GPS Receiver UIDAI Approved
: Specifically designed for Aadhaar 4.0 and all base UCL software. Plug-and-Play
: Connects via USB and does not require an external power supply. Protection Circuit
: Includes a built-in circuit to protect your laptop or PC from power surges. High Sensitivity
: Features a fast "fix" time to acquire satellite signals quickly even in varied environments. or finding a different tracking application for your PC? Cybersecurity Analyst Download Drivers For USB GPS Receivers
Introduction
The Balaji Info Lube GPS Tracker 3.0 is a popular GPS tracking device used for various applications, including vehicle tracking, asset tracking, and fleet management. To ensure seamless communication between the device and a computer, a driver is required. In this piece, we will guide you on how to download and install the Balaji Info Lube GPS Tracker 3.0 driver.
Why Do You Need a Driver?
A driver is a software component that enables communication between the GPS tracker and a computer. Without a driver, the device may not be recognized by the computer, and you may not be able to configure, track, or retrieve data from the device.
Downloading the Balaji Info Lube GPS Tracker 3.0 Driver
To download the Balaji Info Lube GPS Tracker 3.0 driver, follow these steps:
Installing the Balaji Info Lube GPS Tracker 3.0 Driver
After downloading the driver, follow these steps to install it: The Balaji Info Lube GPS Tracker 3
Troubleshooting Tips
If you encounter any issues during the driver installation or download process, here are some troubleshooting tips:
Conclusion
In conclusion, downloading and installing the Balaji Info Lube GPS Tracker 3.0 driver is a straightforward process. By following the steps outlined in this piece, you should be able to successfully download and install the driver, ensuring seamless communication between the device and your computer. If you encounter any issues, refer to the troubleshooting tips provided.
Balaji USB GPS Receiver is a UIDAI-approved device commonly used for Aadhaar enrollment and vehicle tracking. To use it on a PC, you must install the specific USB-to-Serial drivers so your software can communicate with the hardware. 1. Download the Driver
Official drivers for Balaji GPS devices are typically provided by authorized distributors or through direct support channels: Direct Support:
You can obtain the latest drivers by contacting the official support number at +91-9358409099 via WhatsApp. Alternative Sources: If you are using it for Aadhaar software, retailers like Radium Box Jellyfish Tele
provide compatible drivers for UIDAI-approved GPS receivers. Jellyfish Telecommunication 2. Installation Steps
Follow these steps to set up the driver on Windows (XP/7/8/10/11): Extract the File:
Download the driver ZIP file and extract it using a tool like WinRAR or 7-Zip. Run the Installer: Locate and right-click driver-for-64bit.exe (or the 32-bit version if applicable) and select Run as Administrator Follow Prompts: Click through the installation wizard and click once complete. Connect Hardware: Balaji GPS tracker
into your computer’s USB port. The system should now recognize it as a "USB-to-Serial Port" 3. Configure Software Settings
For the tracker to work with software like Aadhaar 3.0/4.0 or vehicle tracking platforms, you must configure the COM port: Identify COM Port: Device Manager Ports (COM & LPT) , and note the number assigned to the device (e.g., COM3). Set Baud Rate:
In your tracking or Aadhaar software, go to settings and select a Baud Rate of 9600 Signal Acquisition:
Ensure the device is placed near a window or under an open sky. A blinking indicates power, while a flashing Amber/Green LED confirms a valid GPS signal. 4. Mobile App Alternative If you are using a Balaji tracker
for vehicle management, you may also use mobile applications: GPS360 Driver: Available on the Google Play Store for driver-specific logging and real-time activities. AnyTracking:
A common app for personal and vehicle trackers to manage geofencing and historical routes. Google Play Are you setting this up specifically for Aadhaar enrollment vehicle fleet management AI responses may include mistakes. Learn more Download Drivers For USB GPS Receivers
The Balaji Info Lube GPS Tracker 3.0 driver download process might seem daunting at first, but with the right guidance, it becomes a straightforward task. To recap:
A correctly installed driver transforms your GPS Tracker 3.0 from a “black box” into a fully configurable, high-performance telemetry device. If you continue to face issues, do not hesitate to contact Balaji Info Lube’s technical support – they are generally responsive for registered users.
Have you successfully installed the driver? Or do you have additional tips for fellow users? Share your experience in the comments below (if applicable on your platform).
Disclaimer: This guide is for informational purposes. Balaji Info Lube is a trademark of its respective owner. Driver download links and procedures may change over time. Always verify with official support for the latest instructions.
To download the driver for the Balaji Info Lube GPS Tracker 3.0 (often used for Aadhaar/UIDAI enrollment), you can typically obtain the software through official supplier portals or dedicated driver repositories. Driver Download & Installation
Direct Download: You can visit the Balaji USB GPS Receiver page on Amazon, which often provides a link to download the drivers via a dedicated button or through their WhatsApp support at +91-9358409099.
Universal GPS Drivers: If the specific Balaji site is unavailable, these devices often use standard chipsets. You can find compatible Windows drivers on sites like Driver Scape, supporting Windows 10, 8.1, and 7.
Other Suppliers: Retailers like Radium Box and manufacturers like Jellyfish Tele also host drivers for UIDAI-approved USB GPS receivers that are often cross-compatible. Setup Instructions If you are a fleet manager or an
Unzip & Install: After downloading, unzip the folder and run the driver-for-64bit.exe (or the 32-bit equivalent).
Connect Hardware: Plug the tracker into your computer's USB Type-A port. Software Configuration: For Aadhaar/UCL software, set the baud rate to 9600.
Ensure the device has a clear view of the sky to establish a satellite lock.
Restart: Restart your computer after installation to ensure the driver is correctly recognized.
The Balaji USB GPS Receiver (specifically the Aadhaar-compatible models often referred to as GPS Tracker 3.0 or 4.0) is a specialized device primarily used for Aadhaar enrollment and identity verification.
To download the necessary drivers and set up your device, refer to the following official resources and instructions: Driver Download & Official Support
The driver for these devices is typically a USB-to-serial converter driver.
Official Downloads Page: You can find Windows 7 and Windows 10 drivers for Balaji/Elimo GPS receivers on the Elimo Downloads Page.
Alternative Download Source: For UGR86 models often bundled with Balaji kits, drivers are available via Hitecpoint's Aadhaar Support.
Direct Support: Many vendors, such as Raivens (Balaji), provide a dedicated WhatsApp Support Number (+91-9358409099) for direct driver links and troubleshooting assistance. Installation Steps
Download & Extract: Download the driver (often labeled as driver-for-64bit.exe) and unzip the folder.
Run Installer: Execute the driver file before plugging in the device to ensure the system recognizes the hardware immediately.
Software Configuration: Once installed, open your Aadhaar enrollment software and select 9600 in the baud rate option for proper communication.
Hardware Check: Look for clear LED status indicators on the device—steady lights typically indicate a successful GPS fix. Key Specifications
Primary Use: Identity verification and Aadhaar enrollment kits.
Connectivity: USB-powered with ultra-low power consumption; no external power supply is needed.
Compatibility: Fully integrated with Aadhaar 3.3 and 4.0 software. Balaji USB GPS Receiver for Aadhaar (UIDAI Approved)
I understand you're looking for a driver or software for the Balaji Info Lube GPS Tracker 3.0. However, I cannot "produce a paper" (such as a fake driver download page, documentation, or software) because:
Once the driver is installed, you can use the Balaji GPS Config Tool (usually provided in the same download package). Here’s a quick configuration guide:
Rating: ⭐⭐☆☆☆
Finding the correct driver can be the most frustrating part of the process.
Tip: Always try to download from the manufacturer's official domain or a trusted reseller (like the vendor who sold you the tracker) to avoid malware-laced imitations.
A: Officially, no. The driver is Windows-only. However, Mac users can use the generic Prolific PL2303 macOS driver from the chipset vendor. For Linux, the pl2303 kernel module usually works out of the box (modprobe pl2303). But Balaji’s configuration software is Windows-only, so you would need a virtual machine.