Choose Layouts
Let’s be realistic. The Behringer BCA2000 is a 20-year-old design. Its preamps are noisy by modern standards (EIN of -122dBu vs. modern interfaces at -129dBu). Its maximum sample rate (48kHz) is limited. And the Windows 10 x64 exclusive driver, while functional, requires disabling important security features like Secure Boot and Driver Signature Enforcement.
However, for certain use cases, it remains a gem:
If you have followed this exclusive guide, you now have a working Behringer BCA2000 on Windows 10 x64. You belong to a small, elite group of audio veterans who refused to e-waste a piece of history.
Final Pro Tip: Once everything works, create a full system restore point. Name it “BCA2000 Working State.” Do not let Windows Update install any “optional audio drivers.” And if you ever upgrade to Windows 11? That is a completely different, much darker article.
Now go make some noise with that old brick. It’s earned its keep.
This article is part of the exclusive Legacy Audio Driver Preservation Project. Last updated: October 2025. The information contained herein is for educational purposes. Modify your Windows security settings at your own risk.
The Behringer BCA2000 was officially designed for Windows XP and lacks native 64-bit drivers from the manufacturer. While some third-party sites claim to offer "Windows 10 x64" downloads for this device, they often point to the original v2.1.0.6 driver (2009), which was only built for 32-bit systems.
Below is a breakdown of how users typically attempt to use this legacy hardware on modern systems and its key standout features. Driver Compatibility Status
Getting the BCA2000 to function on a modern 64-bit Windows 10 PC is technically difficult because 32-bit kernel drivers generally do not run on 64-bit operating systems.
Standard Driver (v2.1.0.6): This is the final official release. Users often try installing it using Compatibility Mode (set to Windows XP SP3), but results are inconsistent and often fail during the installation phase.
The "Workaround" Approach: Most successful modern users bypass the standard driver by using ASIO4ALL or LibUsbK to manage low-latency audio, though this rarely restores full hardware control panel functionality.
MIDI Only: Behringer released a separate 64-bit USB MIDI Driver (v1.0.10) that is compatible with Windows 10 x64, allowing you to use the unit's MIDI ports even if the audio interface part remains inactive. Solid Hardware Feature: Integrated Analog Dynamics
The BCA2000’s most "exclusive" or standout feature—especially for its era and price point—is its Integrated Analog Input Dynamic Control. Behringer BCA 2000 driver install error!!! - Microsoft Q&A
Getting Your Behringer BCA2000 Working on Windows 10 x64 The Behringer BCA2000 Go to product viewer dialog for this item.
is a classic high-speed USB 2.0 interface, but finding official, modern drivers for 64-bit systems can be a challenge. While Behringer has moved on to newer hardware, you can still get this "relic" to work on Windows 10 by using legacy drivers and a specific installation workaround. 1. Download the Legacy Driver
The most stable driver for this device is Version 2.1.0.6, which was originally designed for older Windows versions but can be adapted for Windows 10.
Source: You can find this driver on legacy repositories like Softpedia or DriverIdentifier. behringer bca2000 driver for pc windows 10 x64 exclusive
Alternative: Some users have found success with the USB Audio 2.8.40 legacy driver package. 2. Preparation & Compatibility Mode Before running any installers, ensure your is unplugged. Locate the setup.exe file in your extracted driver folder. Right-click the file and select Properties.
Go to the Compatibility tab and check "Run this program in compatibility mode for".
Select Windows 7 (or Windows XP Service Pack 2) from the dropdown.
Check "Run this program as an administrator" and click Apply. 3. The "Manual Point" Workaround
Often, the standard installer will copy files to C:\Behringer but fail to complete the actual hardware association. If this happens, follow these steps: Behringer BCA 2000 driver install error!!! - Microsoft Q&A
Getting the Behringer B-Control Audio BCA2000 to work on modern 64-bit systems like Windows 10 is a challenge because Behringer never released official 64-bit audio drivers for this device Microsoft Learn
. The latest official audio driver (v2.1.0.6) was designed specifically for 32-bit legacy operating systems like Windows XP
Below is a guide for a workaround that utilizes available 64-bit MIDI drivers and third-party tools to restore functionality. The "Modern Setup" Workaround
Since a dedicated 64-bit audio driver does not exist, the standard method is to separate the MIDI and Audio components of the interface. 1. Install 64-bit MIDI Drivers Behringer did release a 64-bit USB MIDI driver (v1.0.10) that is compatible with Windows 10
. This will allow the hardware buttons, faders, and MIDI ports to communicate with your computer. You can find this on the official BCA2000 product page under the "Software" section. 2. Use ASIO4ALL for Audio
Because you cannot use the legacy 32-bit ASIO drivers on Windows 10 x64, you must use a universal driver like Microsoft Learn Connect the BCA2000 via USB. Open your DAW (e.g., Ableton, Reaper, FL Studio). as your audio device.
In the ASIO4ALL control panel, enable the BCA2000 inputs and outputs. 3. Hardware Settings
Ensure the unit is switched to the correct mode for your needs. Some users find better stability when using the unit strictly as a MIDI controller and routing audio through a separate, modern interface Troubleshooting Tips Compatibility Mode:
If you try to run the original v2.1.0.6 setup, you must right-click the Properties > Compatibility , and set it to Windows XP (Service Pack 3) while running as Administrator Microsoft Learn USB 2.0 vs 3.0:
Legacy Behringer gear often struggles with USB 3.0 (blue) ports. If the device isn't recognized, try a USB 2.0 port or a powered USB 2.0 hub Open Source Alternatives: There are community-driven projects on platforms like
attempting to build custom ASIO drivers for the BCA2000, though these are often for advanced users Behringer BCA 2000 driver install error!!! - Microsoft Q&A Let’s be realistic
Title: Legacy Interface Integration: An Analysis of Driver Availability and Functionality for the Behringer BCA2000 on Windows 10 x64 Architectures
Abstract This paper addresses the persistent user demand for Windows 10 x64 compatible drivers for the Behringer BCA2000 USB Audio Interface. Despite the device’s discontinuation, it remains in circulation within secondary markets and home studio environments. This document investigates the official manufacturer support status, analyzes the technical architecture of the device, and provides a functional methodology for operation on modern Windows 10 systems using available driver packages. The findings indicate that while an "exclusive" Windows 10 x64 driver does not exist from the manufacturer, functional compatibility is achieved through legacy driver installation methods.
You have the driver installed. Now, let’s make it usable for recording.
As of my last update, ensuring that you have the latest and correct drivers can significantly improve the performance and stability of your audio interface. Always refer to official sources first to avoid any malware or incorrect drivers. If you're still having trouble, consider reaching out to Behringer's customer support or checking forums where users might share working solutions.
A concise walkthrough and review for using the Behringer BCA2000 (USB MIDI foot controller) on Windows 10 64-bit with exclusive access to the device — covering driver availability, installation, configuration, troubleshooting, and recommended workflow for stable, low-latency operation.
The original BCA2000 driver (version 1.0.9 and earlier) relied on:
Windows 10 prevents the installation of unsigned or legacy-signed drivers by default.
Do not use the BCA2000 as a primary audio interface.
Better Alternatives (Under $100 USD):
Exclusive content compiled from legacy driver forums, Reddit r/audioengineering, and reverse-engineering communities. Last verified: October 2025.
Finding a stable Behringer BCA2000 driver for Windows 10 x64 is notoriously difficult
because the device was primarily designed for Windows XP and has been officially discontinued for years. The Official Situation Behringer's Official BCA2000 Support Page 64-Bit USB MIDI Driver (v1.0.10)
, but this typically only covers the MIDI functionality, not the full audio interface features. The last official audio driver released was , which was originally intended for Windows XP. Installation Review for Windows 10 x64
Users have reported mixed success using the following "workaround" methods to get the device running on modern 64-bit systems: Compatibility Mode : You must run the v2.1.0.6 setup.exe in Compatibility Mode for Windows XP (Service Pack 2) Manual Folder Unlocking : During installation, the driver often copies files to C:\Behringer\BCA2000
but fails to finish. Users have found success by manually right-clicking this folder, going to Properties > Sharing
, and ensuring permissions are set to "Everyone" before continuing the installation. Device Manager Hack : If the installer "times out," you may need to go to Windows Device Manager , find the "Unknown Device," and manually point it to the C:\Behringer directory to force the driver update. Known Issues & Limitations WDM vs. ASIO : Even if successfully installed, the often will If you have followed this exclusive guide, you
show up as a default Windows playback device (for YouTube, Spotify, etc.) . It usually only works within DAWs (like , Reaper, or Cubase) that can directly address the ASIO driver System Instability
: Using these legacy drivers on a 64-bit kernel can frequently lead to Blue Screen of Death (BSOD) errors (specifically referencing bca2000.sys ) and audio dropouts. Hardware Conflicts
: The device is known to be picky with USB ports; it often fails on newer USB 3.0/3.1 ports and may require an older USB 2.0 hub or PCI-e card to function at all. Microsoft Learn Summary Table Status on Windows 10 x64 Official Support None (Discontinued) Latest Known Driver v2.1.0.6 (XP legacy) MIDI Functionality Generally stable with v1.0.10 64-bit MIDI driver Audio Functionality Highly unstable; requires compatibility hacks Reliability Low; prone to BSOD and "clicks/pops" Alternative Solution : Some users recommend the community-developed ASIO Driver Project on GitHub
as a last-resort way to interface with the hardware on modern systems. through the Windows Device Manager? Product | BCA2000 - Behringer
Getting the Behringer BCA2000 to work on a modern Windows 10 x64 system is notoriously difficult because the device was designed in 2004 for Windows XP and is not USB class-compliant. Official support ended with Windows XP/Vista, but you can attempt to bridge the gap using compatibility modes and manual driver assignment. The Driver Situation
There is no "official" Windows 10 x64 driver. The final official version was v2.1.0.6, originally built for Windows XP. While some third-party sites like Driver Scape claim compatibility with Windows 10, these are often just the old XP/Vista drivers repackaged. Installation Walkthrough (Windows 10 x64)
If you are determined to use this hardware, follow this manual "force-install" method shared by long-time users on Microsoft Q&A and Gearspace: Prepare the Installer: Download the v2.1.0.6 driver. Right-click setup.exe -> Properties -> Compatibility.
Set it to run in Compatibility Mode for Windows XP (Service Pack 2 or 3). Initial Run: Keep the BCA2000 switched off.
Run the setup. It will likely "fail" to complete, but it will extract critical files to C:\Behringer. Manual Driver Assignment:
Turn on the BCA2000. It will appear in Device Manager as an "Unknown Device".
Right-click the Unknown Device -> Update Driver -> Browse my computer for drivers.
Point it specifically to the C:\Behringer\BCA2000 folder where the files were unzipped. Permissions Fix:
If the system refuses to access the folder, right-click the C:\Behringer folder -> Properties -> Security and ensure "Everyone" has read/write permissions. Alternative: ASIO4ALL or Unofficial Projects
ASIO4ALL: If the WDM driver installs but has high latency, use ASIO4ALL to wrap the driver for better DAW performance.
GitHub Project: There is a community-driven ASIO driver project for the BCA2000 on GitHub that uses the LibUsbK library to bypass old Windows driver signatures. This is highly experimental and for advanced users only.
Note: Because this device relies on very old USB 2.0 architecture, it may still suffer from "blue screen" errors (BSOD) or disconnects on modern USB 3.0/3.1 ports. Connecting it through a powered USB 2.0 hub sometimes improves stability. Behringer BCA 2000 driver install error!!! - Microsoft Q&A
If you're having trouble finding the driver or if the official sources don't provide a straightforward download: