Chevron Digital Timer Ew-32 User Manual -

If you need the exact OEM manual, contact Chevron or the store of purchase with model EW-32.

Note: If your timer has different button labels (e.g., “SET” instead of “CLOCK”), the steps will still be similar. For an original manual, try searching “Chevron EW-32 instructions” or check the back of the unit for a full model code like EW-32V2 or EW-32PRO.

The Chevron Digital Timer EW-32 is a plug-in automation device featuring a large LCD display and support for up to 10 daily on/off cycles Initial Setup and Reset

Before first use or after a long period of non-use, plug the timer into a wall outlet and charge it for to power the internal memory backup battery. : Use a paper clip or pin to press the button to clear all previous settings. Setting the Current Time Press and hold the button for 3 seconds to enter time setting mode. buttons to adjust the current , then press to confirm. buttons to set the , then press buttons to set the , then press to finalize the current clock. Programming ON/OFF Cycles

The EW-32 supports up to 10 independent programs (P1–P10). Enter Mode : Press the button once to enter program setting mode. Select Program to choose a program number (e.g., P1), then press Set ON Time

Select the active days (e.g., individual days, weekdays, or weekends) using , then press Adjust the for the appliance to turn on. Set OFF Time

: Repeat the process to set the specific time and days for the appliance to turn off. : Press the button to confirm each parameter. Operating Modes Toggle through the following modes by pressing the ON/AUTO/OFF

: Manual override to keep the connected device permanently on. : The timer operates based on your programmed schedules. : Manual override to keep the device permanently off. Special Functions Countdown Timer : Press the button once to enter countdown mode. Set the duration with , and use the button to start/stop the timer. Random Mode

: Some versions allow activating a "Random" feature (often by pressing a specific button combination) to turn devices on/off within a 10–31 minute variance for security. for a light or appliance? Chevron Digital Timer Ew 32 Zip - Facebook

: Before the first use or if the screen is blank, plug the timer into a wall outlet for at least to charge the internal memory backup battery. : Use a pin or paperclip to press the button to clear any old settings and start fresh. Setting the Current Time Press and hold the button for 3 seconds until the display begins to flash. buttons to adjust the to confirm each selection and finish the clock setup. Programming On/Off Cycles The EW-32 typically supports up to 10 unique on/off programs chevron digital timer ew-32 user manual

button once to enter program mode (you will see "P1" or "1 ON"). to select the program number (P1–P10) and press Set "ON" Time

buttons to choose the days of the week (individual days or blocks like Mon–Fri), then the hour and minute. Press to confirm. Set "OFF" Time

: The timer will automatically move to the "OFF" setting for that program. Repeat the process to choose the time you want the device to turn off. Repeat for any additional programs, then press the (or wait) to return to the main screen. Operating Modes ON/AUTO/OFF button to toggle between modes: : Manual override to keep the device permanently on. : The timer will follow your programmed schedules. : Manual override to keep the device permanently off. Additional Features Countdown (CD) : Press the

button once to enter countdown mode. Set your desired time and press the (or equivalent) button to start. Random Mode

: This function (often activated by a specific button combo like

) turns devices on and off at random intervals to deter intruders while you're away. or setting up a complex multi-day schedule Chevron Digital Timer Ew 32 Zip - Facebook

Press ON/AUTO/OFF repeatedly to switch:

Display shows “AUTO” or “MANUAL” depending on model.

Press SET/CLK to begin editing.

Set the hour using +/- → Press SET/CLK.

Set the minute using +/- → Press SET/CLK.

Select the days:

Press SET/CLK to save the ON time.

Screen now shows 1 OFF (Program 1, Turn Off time).

Repeat steps 2-5 to set the OFF time for this program.

Press PROG (P) to move to Program 2 (2 ON), or press SET/CLK to finish.

Repeat for events 2 through 8 as needed. If you need the exact OEM manual, contact

This product comes with a standard warranty against manufacturing defects. Please retain your proof of purchase. The warranty does not cover damage caused by misuse, overload, or wear and tear.

The Chevron EW-32 is a versatile digital timer designed for indoor use, allowing users to automate appliances with up to 20 different on/off programs per day. This guide provides a comprehensive walkthrough for setting up, programming, and maintaining your EW-32 timer. Initial Setup: Charging and Resetting

Before you begin programming, the internal backup battery must be charged to ensure the LCD remains active when the unit is unplugged.

Charge the Battery: Plug the timer into a standard power outlet and leave it for 2 to 14 hours.

Reset the Device: Once charged, use a small, non-metal object (like a toothpick or pen) to press the RESET (or 'R') button. This clears any factory testing data and prepares the timer for new settings. Setting the Current Time and Date

Accuracy is vital for scheduled programs. The EW-32 typically follows these steps to set the real-time clock:

To set up and program your Chevron Digital Timer EW-32 , follow these steps for initial setup, current time adjustment, and setting on/off schedules. 1. Initial Setup Before programming, ensure the unit is ready for use:

Charge the Battery: Plug the timer into a live power outlet for at least 1 hour (up to 14 hours for a full charge) to ensure the internal memory backup battery is powered. Note: If your timer has different button labels (e

Reset the Unit: Use a pointed object like a pencil or paper clip to press the small "R" (Reset) button. This clears any existing data and prepares the screen for new settings. 2. Setting the Current Time

You must set the current day and time so the scheduled programs run correctly:

Day of Week: Press and hold the "CLOCK" button. While holding it, press the "WEEK" button until the correct day (e.g., MO, TU, WE) appears at the top of the screen.

Hour: Continue holding "CLOCK" and press the "HOUR" button to set the current hour. Note the AM/PM indicator if the timer is in 12-hour mode.

Minute: Still holding "CLOCK", press the "MIN" button to set the correct minutes. 3. Programming On/Off Schedules The EW-32 can store up to 20 different On/Off programs.

Masterplug 7-Day Timer Instructions | PDF | Electrical Engineering - Scribd

1. SWITCH OFF AT MAINS. * Press TIMER button and release. LCD shows ON_1. ... * Press WEEK button to set the day or block of days.

7 day electronic timer operating instructions - Sparks Direct

How long does the EW-32 remember settings? With a fully charged internal battery (charged after ~12 hours plugged in), the unit will retain your programs and keep the clock running for 6 months without AC power.