Commax Dp-ra01 Installation Manual May 2026
Most manuals show that the terminal block attaches to the wall bracket, not directly to the monitor.
This is where most DIYers get stuck. The DP-RA01 has a terminal block on the back (or on the mounting plate) with numbered posts. Here is the standard Commax 4-wire color coding logic.
Standard Commax Terminal Configuration:
Note: Always double-check the manual included with your specific door camera model. While the colors above are standard for Commax, variations exist in different production years.
If you are replacing an old unit: Don’t just guess. Take a photo of the old wiring with your phone before disconnecting anything. Match the wire colors to the terminal numbers.
If your DP-RA01 is broken and you cannot find an exact replacement, the Commax DP-R01A (newer version) is pin-to-pin compatible. The wiring and DIP switch settings remain identical to this manual. However, do not mix with 2-wire digital systems.
The DP-RA01 uses binary addressing. Set switches as follows:
| Unit # | Switch 1 | Switch 2 | Switch 3 | Switch 4 | | :--- | :--- | :--- | :--- | :--- | | 1 | ON | OFF | OFF | OFF | | 2 | OFF | ON | OFF | OFF | | 3 | ON | ON | OFF | OFF | | 4 | OFF | OFF | ON | OFF |
Note: The master door station must be programmed to call the correct monitor ID number. Refer to your door unit manual for call routing. commax dp-ra01 installation manual
Product Overview
The Commax DP-RA01 is an outdoor door camera module designed for use with Commax digital video intercom systems. It provides HD video, two-way audio, and a durable, weather-resistant housing. This guide covers standard surface-mount installation.
Tools Required
Package Contents
| Terminal Label | Function | Wire Color (Standard) | Description | | :--- | :--- | :--- | :--- | | A (Audio) | Audio Signal | White | Carries voice communication. | | G (Ground) | Common Ground | Green | Common reference voltage. | | V (Video) | Video Signal | Black | Carries composite video feed to monitor. | | P (Power) | Power | Red | Supplies voltage from monitor to camera. |
Note: Wire colors may vary based on the specific cable manufacturer. Always trace wires using a multimeter if colors do not match the standard.
If you want, I can convert this into a printable step-by-step checklist, a wiring diagram tailored to a specific Commax master model, or a short troubleshooting flowchart — tell me which.
(Remember to follow manufacturer safety guidance and local codes during installation.)
The COMMAX DP-RA01 is a versatile 1-to-2 audio doorphone system designed for residential use. It features two handsets—a master unit (DP-RA01M) and a sub-unit (DP-RA01S)—that allow for internal communication as well as visitor identification and remote door release. Technical Specifications Power Source AC 100-240V, 50/60Hz Wiring (Door Unit) 2 wires (non-polarity) Wiring (Inter-unit) 6-wire or 8-wire connection between handsets Wiring (Door Lock) 2 wires from the handsets to the electric strike Transmission Distance 100m (0.65Ø) or 150m (0.8Ø) Dimensions Approx. 107(W) x 195(H) x 39(D) mm Mounting Type Wall surface mount Installation Steps 1. Preparation and Safety Most manuals show that the terminal block attaches
Commax DP-RA01 is a 1-to-2 audio intercom system notable for its flexible installation options and simplified 2-wire connectivity for basic functions. Key Installation Features Flexible Mounting : The unit is designed for both wall mounting , allowing you to choose the best placement for your space. Simplified 2-Wire Connection
: It uses a standard 2-wire system from the master handset to the door unit, which simplifies the wiring process. Expandable System : The setup supports one door station with two room stations , making it ideal for multi-room communication. Door Release Integration : It includes a dedicated electric door-key release button on the handset to remotely unlock doors. Xylophone Chime
The Commax DP-RA01 is a surface-mounted audio door phone room unit designed for single-house communication. It provides two-way audio communication with a door station and includes a dedicated button for remote door release. 1. Key Specifications Power Source: AC 100V–240V (50/60Hz). Wiring Type: Door Station to Handset: 2-wire connection.
Door Release: 2-wire connection (typically requires a separate power source depending on the lock model).
Mounting Type: Surface-mounted using a wall-mounting bracket.
Connectable Products: Compatible with door stations such as the DR-2G, DR-2K, DR-201D, and DR-2AN. 2. Installation Steps
The installation requires mounting the bracket and completing the non-polarity wiring between units.
Prepare the Mounting Site: Choose a location away from excessive humidity, direct sunlight, or heat sources. Attach the Bracket: Tighten screws and gently tug each wire to ensure connection
Secure the provided wall-mounting bracket to the wall using the included screws.
Wire the Door Station: Connect the two wires from the door station to the terminal ports on the back of the . These are generally non-polarity connections.
Wire the Door Release (Optional): Connect the electrical door lock to the designated door release terminals (often terminals 5 and 6) on the room unit.
Mount the Unit: Align the slots on the base of the handset with the hooks on the wall bracket and pull the unit down slightly to secure it.
Power Connection: Once all wiring is complete, plug the power cord into a standard AC outlet. COMMAX DP-2S User Manual | PDF | Electrical Wiring - Scribd
I couldn’t provide the actual Commax DP-RA01 installation manual directly, but here’s a useful, practical review of what you can expect from the manual and the installation process — based on typical Commax door camera/intercom units.
Hook the top of the DP-RA01 onto the bracket, then press the bottom until it clicks. Re-attach the front cover if removed.
