Download Spflash Tool Version 5.2404.00.000 ⏰ 👑

Even with the latest version, you might encounter errors. Here is a troubleshooting table:

| Error Code | Meaning | Solution in v5.2404.00.000 | | :--- | :--- | :--- | | S_BROM_CMD_SEND_DA_FAIL | USB handshake timeout | Reinstall MTK USB drivers. Use USB 2.0 port, not USB 3.0. | | S_DL_GET_DRAM_SETTING_FAIL | Invalid scatter or preloader | Load a compatible preloader from your exact build number. | | STATUS_SECURE_AUTH_FAIL | Secure boot enabled | Use an authenticated DA file (Auth_sv5.auth) – available only for unlocked devices. | | S_DL_PMT_ERR_NO_SPACE | Partition mismatch | Select Firmware Upgrade instead of Download Only. | | BROM ERROR: S_FTHND_FILE_IS_NOT_LOADED_YET | Missing DA file | Manually specify a DA file (MTK_AllInOne_DA.bin) inside the tool’s DA folder. | Download SPFlash Tool version 5.2404.00.000

  • Click “Download”: The tool waits for a connection.
  • Connect the phone: While the phone is OFF, hold the Volume Down or Volume Up button (varies by chipset) and connect the USB cable to your PC.
  • Observe the progress bar: A yellow or purple bar indicates the preloader handshake. The tool will write preloader, lk, boot, system, vendor, and other partitions.
  • Completion: A green checkmark means “Download OK.” Disconnect the phone and power it on (first boot may take 5–10 minutes).

    • This version includes the standard suite of features expected from the tool, with specific optimizations for the era of hardware it supports: Even with the latest version, you might encounter errors

    SP Flash Tool (SmartPhone Flash Tool) is the official Windows-based utility developed by MediaTek Inc. for firmware flashing, scatter-loading, and low-level formatting of devices powered by MediaTek chipsets. Click “Download”: The tool waits for a connection

    Version 5.2404.00.000 represents a release from April 2024 (build year 2024, month 04). It is widely used by service centers, developers, and advanced users for:

    | Issue | Solution | |-------|----------| | ERROR: STATUS_DEVICE_CTRL_EXCEPTION (0xC0050005) | Use a different USB port (2.0 preferred); test updated DA file. | | Tool freezes at “Download DA 100%” | Disable USB selective suspend in Power Plan. | | S_BROM_CMD_STARTCMD_FAIL (0x7D4) | Reinstall VCOM drivers, disable driver signature enforcement (test mode). | | Auth file required (secured boot) | Supply the correct auth_sv5.auth file (vendor-proprietary). |