Epson L4150 L4160 L4170 Resetter Adjustment Program Exclusive May 2026

There is no button combination on the Epson L4150, L4160, or L4170 that resets this counter. The only official way is to replace the pads and use a specialized Epson service program. This is where the resetter adjustment program comes into play.

| Error Message | Solution | | --- | --- | | "Communication Error" | You are not in Service Mode. Repeat Step 1. Ensure USB cable is directly connected (no hub). | | "Function Not Supported" | Your firmware is too new for this exclusive version. You may need to downgrade your printer's firmware (advanced users only). | | "Reset OK, but error returns after reboot" | The EEPROM is corrupted. Re-run the program and choose "EEPROM Data Copy" to rewrite the backup. | | Antivirus deletes the file | This is common. Add the folder to your antivirus exclusions. The "exclusive" version is safe if downloaded from a reputable source. |

⚠️ Warning: This tool is for troubleshooting and maintenance only. Misuse can void any remaining warranty or permanently corrupt the printer’s firmware. There is no button combination on the Epson

Requirements:

Steps:

  • Run the adjustment program as Administrator.
  • Select “Particular adjustment mode” → “Waste ink pad counter”.
  • Click “Check” to read current counter value, then “Initialization”.
  • Exit the tool, turn printer off/on normally.

    • The error message will be gone, and printing can resume.

    Before diving into the resetter tool, you must understand the problem. Epson printers use a maintenance box or an internal absorbent pad to collect ink used during head cleaning and borderless printing. The printer tracks this usage via a digital counter. After approximately 8,000 to 15,000 prints, the counter hits 100%. ⚠️ Warning: This tool is for troubleshooting and

    When this happens, the printer locks itself down. You will see an error message on your screen: "A printer’s ink pad is at the end of its service life. Please contact Epson Support." The printer will not function until this counter is reset.

    While the software resets the electronic counter, it does not physically clean the saturated ink pads inside the printer. Requirements:

    epson l4150 l4160 l4170 resetter adjustment program exclusive