Firmware Version Dwr-m960-v1.1.49 -
A solid, no-surprises maintenance release.
If your DWR-M960 is already running 1.1.46 or newer, you can skip this update unless you need the minor LTE reconnection fix. For users on older firmware, this version delivers noticeable improvements in reliability without introducing regressions. Power users dependent on band locking or VPN performance should consider third-party firmware instead.
Stability score: 8.7/10
Security score: 7.5/10 (lacks patches for 2024 CVEs, but none critical for home/SOHO use)
Firmware version for the D-Link (Hardware Revision ) is a critical release primarily noted for a significant security disclosure. 🔒 Security Criticality
In November 2023, D-Link issued a security announcement regarding this specific version. Vulnerability Type:
Improper access control related to configuration file handling.
A user with LAN access could download and decode the router's configuration file. The Impact: This file discloses default user credentials , including the admin password
. An attacker could then modify the configuration file, upload it back to the device, and gain full administrative control. 🛠 Technical Specifications (
The firmware supports a dual-band 4G AC1200 LTE router featuring: Processor: MediaTek MT7620A SoC. Up to 150 Mbps downlink and 50 Mbps uplink via 4G LTE Cat4. Five Ethernet ports (1 Gigabit LAN and 4 100Mbit ports). Security Features:
Dual-active firewalls (SPI and NAT) and VPN support (PPTP, L2TPv2/v3). ⚠️ Recommendations & Mitigation If you are currently running
, it is highly recommended to upgrade to a later version (such as ) to resolve these vulnerabilities. Action Item Check Version Access the web interface at 192.168.0.1 and navigate to System Management System Information Apply Patch Download the latest official patch from the D-Link Support Page or regional portals like D-Link MEA Manual Update Management in your router settings to upload the new Change Credentials
Immediately change the default admin password after any update. Some users seek third-party firmware like
for this hardware, though this may void your warranty and requires technical expertise. download link for the newer firmware or walk you through the manual upgrade steps if you're stuck. Which would you prefer? DWR-960 User Manual - DLink 27 Oct 2021 —
Firmware version v1.1.49 D-Link DWR-M960 (Hardware Revision Ax) is a legacy software version that was subject to a significant security advisory in late 2023
. This specific version was found to be vulnerable to a configuration file exploit that could allow malicious local users to gain administrative control. Critical Security Vulnerability According to a security announcement from D-Link Support , firmware v1.1.49 contains a vulnerability where: Access Requirement firmware version dwr-m960-v1.1.49
: A malicious user must have access to the LAN side of the device. The Exploit
: The device configuration file can be downloaded and decoded to reveal default user credentials, including the admin password.
: An attacker can modify the decoded configuration file and re-upload it to gain full unauthorized admin access to the router. Recommended Action Users running
are strongly urged to update to a more recent version, such as or newer, to patch these security flaws. Official Downloads : Latest firmware can typically be found at the D-Link Middle East Download Center or local support pages like Verification
: Always compare the installed version on your router's web interface with the version provided in the update package to ensure the patch was successful. How to Update Your Firmware
To move away from version v1.1.49, follow these steps provided by D-Link support resources (Non-US) DWR-M960 : H/W Rev. Ax :: F/W v1.1.49 - D-Link
The DWR-M960 firmware version v1.1.49 is a critical security-related release for the D-Link 4G AC1200 LTE Router (Hardware Revision Ax). While it was intended to maintain device stability, it has been superseded by newer versions due to severe security vulnerabilities identified in the 1.1.x branch. ⚠️ Critical Security Alert
If you are currently running v1.1.49, your router is likely vulnerable to CVE-2025-13304, a stack-based buffer overflow.
The Risk: Remote attackers can exploit the "ping diagnostic" feature to execute code or crash your router.
Authentication: This attack does not require a password to succeed.
Recommendation: Immediately upgrade to a newer version (such as v1.1.51 or later) which contains patches for these flaws. 🛠️ Update and Maintenance Guide
To secure your device, follow these steps to move beyond version 1.1.49. 1. Identify Your Hardware
Hardware Revision: Check the sticker on the bottom of the router. This firmware is specifically for Revision Ax. A solid, no-surprises maintenance release
Current Version: Log in to http://192.168.0.1 and look at the top-right corner of the web interface to confirm your current version. 2. Perform the Upgrade
Use a Wired Connection: Always perform firmware updates via an Ethernet cable, never over Wi-Fi, to prevent "bricking" (rendering the router unusable). Manual Upload:
Download the latest .bin file from the D-Link Support Portal. Navigate to Maintenance > Firmware Update. Select the file and click Upload. 3. Troubleshooting
Admin Page Issues: Users have reported that the admin login page may fail to load after some updates; if this happens, a factory reset (holding the reset button for 10 seconds) is often required.
Country Locks: Some versions of this firmware may lock the region settings (e.g., to UAE). Installing the most recent global firmware typically resolves these regional restrictions. 💡 Advanced Options: OpenWrt
For users seeking more control or security than the stock D-Link firmware provides, the Go to product viewer dialog for this item. can sometimes be flashed with OpenWrt.
Benefits: Frequent security updates, advanced firewall rules, and removal of vendor-specific bugs.
Installation: Requires using the JBOOT bootloader or the OEM GUI to upload a "factory.bin" image. Note: This may void your warranty. (Non-US) DWR-M960 : H/W Rev. Ax :: F/W v1.1.49 - D-Link
Key Features and Updates:
Device Information:
The D-Link DWR-M960 4G LTE Router is a wireless router designed for mobile and remote applications. It supports 4G LTE connectivity, providing high-speed internet access for multiple devices.
Checking and Updating Firmware:
To check and update the firmware on your D-Link DWR-M960 router: Device Information: The D-Link DWR-M960 4G LTE Router
Best Practices:
For specific details about the DWR-M960-V1.1.49 firmware version, such as release notes or changelogs, please consult the D-Link support website or contact their customer support team.
Firmware version for the D-Link (Hardware Revision Ax) is primarily known for a critical security vulnerability involving unauthenticated configuration file disclosure. Security & Performance Review Critical Vulnerability:
Version v1.1.49 has a documented flaw where a malicious user with access to the LAN side can download and decode the device's configuration file. This file contains sensitive information, including the plain-text admin password , allowing an attacker to gain full control of the router. Stability:
Users have reported issues with the admin login page failing to load or "dead boot" scenarios when updating or using older firmware versions on this specific model. Successor Version: A newer version,
, has been observed in the community to resolve some stability and bricking issues. Key Features of DWR-M960
If you are using this firmware, you are likely utilizing these core hardware features: Connectivity:
Supports 4G LTE Cat4 with speeds up to 150 Mbps downlink and 50 Mbps uplink. Redundancy: Includes an auto-failover
feature that switches between mobile broadband and fixed-line internet to maintain a constant connection. Security Tools:
Built-in SPI/NAT firewalls and WPA/WPA2 wireless encryption. www.dlinkmea.com Recommendation It is strongly recommended to update your firmware immediately
beyond v1.1.49 due to the disclosure vulnerability. You can find official updates by searching for your specific hardware revision (found on the underside of the device) at the D-Link Support Center a newer version to secure your router? (Non-US) DWR-M960 : H/W Rev. Ax :: F/W v1.1.49 - D-Link
Based on industry standards for the DWR-M960 hardware class, the firmware likely utilizes a Linux-based embedded architecture.
Even with careful steps, things can go wrong. Here is how to recover.
Some users report that IPv6 stops forwarding to LAN clients after 24 hours. Workaround: Under Advanced → IPv6, set the mode to “Link-Local Only” or disable IPv6 entirely if your ISP doesn’t use it.
Updating to or restoring firmware version dwr-m960-v1.1.49 typically follows this industrial protocol: