Motherboard Front Panel Connectors | Foxconn N15235

Q1: Where can I buy a replacement front panel connector block for the Foxconn N15235?
A: You cannot buy a new one easily, but you can use dupont jumper wires (female to female) to connect your case’s individual leads. Search for “2.54mm pitch jumper wires” on Amazon or eBay.

Q2: I lost the original case. Can I use this motherboard in a new case?
A: Absolutely. The N15235 uses standard ATX front panel pin spacing (2.54mm). Any modern case’s front panel cables will fit. Just follow the pinout in Section 3.

Q3: My case has a single 8-pin block connector. Will it work?
A: Possibly, but check the pinout. Many OEM cases (Acer, Dell) use proprietary block connectors that are not compatible. You may need to cut the block and separate the wires. foxconn n15235 motherboard front panel connectors

Q4: Is there a BIOS setting to change front panel behavior?
A: No. The front panel is purely hardware-controlled. Check BIOS only for “Power On By Keyboard/Mouse” – unrelated to physical buttons.

Q5: What is the missing pin for?
A: It is a physical key to prevent you from plugging the connector in upside down. Always align your connector so that the blocked hole goes over the missing pin. Q1: Where can I buy a replacement front

While not strictly “front panel connectors,” users often confuse nearby headers.

Find the HDD LED cable (or IDE LED / HD LED). Connect the positive (+) wire to Pin 1 (top row, first pin from left) and the negative (-) wire to Pin 3 (top row, second pin from left). If the LED doesn’t light, reverse the polarity. While not strictly “front panel connectors,” users often

Before closing the case, ensure:

The N15235 has a separate 4-pin speaker header (usually labelled SPEAKER or SPK) near the front panel header. Pinout: