How To Reset Samsung Ml-2165 Printer May 2026

Note: If the LED does not flash red/green, try the sequence again. Timing is critical on the ML-2165.

Before attempting any advanced reset, a soft reset can clear temporary errors caused by static charge or memory buffers. This is non-destructive, meaning it will not erase settings.

Steps:

When this works: Soft resets resolve frozen displays, failure to wake from sleep mode, or transient “paper jam” messages when no jam exists. how to reset samsung ml-2165 printer

Use this method if you have refilled your toner or installed a new cartridge, but the printer still displays the red toner LED and refuses to print.

Method A: The Button Sequence

Method B: The "Fuse" Method (If Method A fails) Some Samsung ML-2165 cartridges require a physical reset fuse. If the button method does not work: Note: If the LED does not flash red/green,

This method resets the printer’s internal memory, clears errors, and resets all user settings. It is equivalent to a factory restore.

Steps:

  • While holding both buttons, connect the power cord (if it was unplugged) or turn on the main power switch.
  • Continue holding for 15–20 seconds until all LEDs flash rapidly.
  • Release both buttons.
  • Wait for the printer to finish its startup sequence (the green light will become solid).

    • Result: All settings revert to factory state. You will need to reinstall drivers and set your preferred paper size. Before attempting any advanced reset, a soft reset

    This is the most common reset for ML-2165 owners who refill toner cartridges. The printer uses a drum and toner chip, but this button sequence bypasses the chip warning.

    Steps:

    Alternative sequence (if the above fails):

    Verification: Print a configuration page. On Windows, go to Printer Properties → General → Print Test Page. The toner level should now show as “Full” or no longer display a low toner warning.