After update, check firmware version via NGENUITY or device properties → Events.
The hyperx_cloudii_firmware_updater_rev0010.exe (2021) is a legacy tool – useful in specific edge cases, but outdated for most users. If your Cloud II is working fine, leave the firmware alone. If you must update, get the newest version from HyperX directly.
Safe updating, and happy gaming. 🎧
Disclaimer: This post is for informational purposes. Always follow official HyperX instructions. Firmware updates carry a small risk; ensure your device is backed up (if applicable) and power is stable.
This is a detailed, investigative look into the file you’ve referenced:
hyperxcloudiifirmwareupdaterrev0010.exe (associated with the year 2021).
Q: Does the rev0010 updater work on macOS or Linux?
A: No. The .exe is Windows-only. For macOS, you would need to use a Windows virtual machine or Boot Camp, but this is risky. HyperX does not provide a macOS firmware tool for the wired Cloud II.
Q: My headset works fine. Should I run rev0010 anyway?
A: No. “If it ain’t broke, don’t fix it.” Firmware updates carry a small risk. Only update if you experience the specific issues mentioned above.
Q: I lost the USB sound card. Can I still update firmware?
A: No. The firmware resides on the USB sound card/control box. Without it, the headset is just a standard analog headset with no updatable components.
Q: Is rev0010 compatible with HyperX Cloud Alpha or Cloud Flight?
A: Absolutely not. Using this updater on any other headset model may damage the device.
Troubleshooting Your HyperX Cloud II : Is Firmware Rev 0010 Right for You? If you’ve been hunting for the hyperxcloudiifirmwareupdaterrev0010.exe
file, you’re likely trying to solve a specific connectivity or audio issue with your HyperX Cloud II headset. Released as a key update around 2021, this firmware version was designed to improve stability, particularly for users moving between PC and consoles.
Here is a quick guide on what this update does and how to install it safely. What Does Firmware Rev 0010 Fix? The Rev 0010 update was primarily released to address PlayStation 4 and PlayStation 5 compatibility . Key improvements included: Audio Stability
: Fixed issues where the USB sound card might not be recognized by the console. Volume Control
: Improved sync between the physical buttons on the dongle and the system volume. Plug-and-Play Reliability : Smoother handshakes when hot-plugging the USB device. Preparation Checklist Before running the file, ensure you have the following: The Original USB Dongle : Firmware updates apply to the USB Sound Card , not the headset’s 3.5mm jack itself. A Windows PC : The updater is an executable ( ) and must be run on a Windows environment. Direct Connection
: Plug the dongle directly into a motherboard USB port. Avoid using USB hubs or front-panel ports, as power fluctuations can "brick" the device during an update. How to Install the Update : Locate the official hyperx_cloud_2_firmware_updater_rev_0010.exe from the official HyperX Support page
Note: Always verify the source to avoid malware disguised as drivers. : Plug your Cloud II USB sound card into your PC. Run the File
: Open the updater. It should display your current version and the "Target Version" (0010). : Click "Update." Do not unplug the device hyperxcloudiifirmwareupdaterrev0010 exe file 2021
until the progress bar reaches 100% and a "Successful" message appears. Power Cycle
: Unplug the dongle and plug it back in to initialize the new firmware. Should You Update?
If your headset is working perfectly, the common tech mantra applies: If it ain’t broke, don’t fix it. However, if you are experiencing low mic volume crackling audio PS5 isn't detecting the dongle , Rev 0010 is a highly recommended fix. Need more help with your setup?
Check out our other guides on optimizing your gaming audio or troubleshooting the latest HyperX peripherals!
the firmware if this version causes issues on your specific system?
The HyperX Cloud II Firmware Updater (Rev 0010) is a specific update designed to improve the performance and compatibility of the Cloud II USB sound card. While this specific version was widely discussed around 2021, it is primarily intended for users experiencing specific issues, such as low microphone volume or compatibility problems with PlayStation consoles. Important Pre-Update Checklist
Wired Connection Only: This update is for the USB Control Box (the sound card). Ensure your headset is plugged into the control box and the control box is plugged directly into a USB port on your PC.
Hardware Revision: This firmware is for the original HyperX Cloud II. It is not compatible with the Cloud II Wireless or newer Cloud III models.
Backup: While rare, firmware updates carry a small risk of "bricking" the device if interrupted. Do not unplug the device during the process. Step-by-Step Installation Guide Download the File
Locate the official HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe from the official HyperX support page. Avoid third-party mirror sites to ensure the file is safe and untampered. Prepare the Hardware
Connect your HyperX Cloud II USB Control Box to a USB 2.0 or 3.0 port on your computer.
Disconnect any other unnecessary USB audio devices to prevent software conflicts. Run the Updater
Right-click the .exe file and select "Run as Administrator."
The updater window will display your Current Version and the Target Version (0010). Execute the Update Click the "Update" button.
The progress bar will move as the new firmware is flashed to the USB dongle. Do not close the program or unplug the headset during this time. Finalize and Reset
Once the "Successful" message appears, click OK and close the updater.
Crucial Step: Unplug the USB Control Box from your computer, wait 5 seconds, and plug it back in. This power cycle initializes the new firmware. What Rev 0010 Changes After update, check firmware version via NGENUITY or
PlayStation Compatibility: Improves volume levels and mic monitoring when used with PS4 and PS5.
Microphone Optimization: Adjusts the gain levels to help with "quiet mic" complaints common in older firmware versions.
OS Stability: Fixes minor "device not recognized" errors on Windows 10 and 11. Troubleshooting Common Issues
"Device Not Found": Try a different USB port. If you are using a USB hub, plug the device directly into the motherboard/laptop instead. Update Failed
: Disable your antivirus temporarily, as some security software blocks the "flashing" process required for firmware updates.
No Sound After Update: Go to Sound Settings > Control Panel and ensure " HyperX Cloud II
" is still set as your Default Playback and Default Recording device.
The file HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe is the official standalone utility used to update the firmware on HyperX Cloud II (wired) headsets to version 0010. This specific version was widely discussed around 2021 as the primary update to enable or improve PlayStation 4 compatibility, specifically allowing the USB sound card’s 7.1 surround sound and volume buttons to function on the console. Post Ideas for This File
Depending on where you are posting (Reddit, a tech blog, or a support forum), here are a few options: Option 1: The "Support & Troubleshooting" Post
Title: Still having PS4 issues with your HyperX Cloud II? Check your firmware!
Body: If your USB dongle volume buttons or 7.1 surround sound aren't working on your PS4, you likely need Firmware Rev 0010.
The Fix: Use the HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe utility.
Pro Tip: Many headsets shipped with "0.0.3.0" which was actually a typo for "0.0.0.3"—meaning 0010 is a definite upgrade.
Warning: Do not unplug the headset during the update, or you risk bricking the USB sound card. Option 2: The "Performance & Maintenance" Post
Title: Essential Update for HyperX Cloud II Wired (Firmware 0010)
Body: Keeping your Cloud II updated ensures the best audio processing and bug fixes. File: HyperX_Cloud_II_Firmware_Updater_Rev_0010.exe What it does: Primarily adds full PS4 console support.
How to apply: Just run the .exe with your USB sound card plugged in. Once it says "Successful," you must power cycle the device by unplugging and plugging it back in. Key Installation Steps The hyperx_cloudii_firmware_updater_rev0010
Assuming you want information about the file "hyperxcloudiifirmwareupdaterrev0010.exe" from 2021:
Title: HyperX Cloud II Firmware Updater Rev 0010 (2021 Release): Overview and Advisory
Introduction The file HyperXCloudIIFirmwareUpdaterRev0010.exe refers to a specific software utility released by HyperX (formerly a division of HP, originally Kingston) designed to update the internal firmware of the HyperX Cloud II gaming headset. This specific revision, released around 2021, was a critical update for users experiencing hardware recognition issues, particularly after major Windows updates.
Purpose of the Update The HyperX Cloud II is a highly popular gaming headset known for its durability and sound quality. However, as operating systems evolve, the internal driver software within the headset’s USB sound card occasionally requires patching to maintain compatibility.
The primary functions of the Rev 0010 firmware updater included:
Installation Process The utility is a standalone executable, meaning it generally does not require a full software suite installation to run. The typical process for this specific revision involves:
Critical Advisory: Driver vs. Firmware A common point of confusion for users in 2021 was the distinction between the Firmware Updater and the USB Driver.
The Rev 0010 update was specifically for the firmware. If a user installed this but still had issues, they often needed to manually update the "HyperX Virtual Surround Sound" driver within Windows Device Manager. Microsoft's automatic driver updates frequently conflicted with the older HyperX drivers, leading many users to mistakenly believe the firmware update failed.
Safety and Security Warning As this file dates back to 2021, users attempting to locate it today should exercise caution:
Conclusion The HyperXCloudIIFirmwareUpdaterRev0010.exe file represents a significant maintenance patch in the product's lifecycle. While essential for fixing compatibility bugs in 2021, users today should ensure they are downloading the correct version for their specific hardware revision and should prioritize official sources to ensure system security.
I understand you're looking for an article about a specific file named hyperxcloudiifirmwareupdaterrev0010.exe from 2021. However, I must first provide an important safety disclaimer before proceeding.
⚠️ SECURITY NOTICE:
The filename hyperxcloudiifirmwareupdaterrev0010.exe is not an officially documented or verified file from HyperX (now owned by HP). As of 2025, HyperX’s official firmware update tools for the Cloud II headset follow different naming conventions (e.g., CloudII_Firmware_Update_0010.exe or similar, hosted only on their official support site). The exact string above appears irregular. It could be:
Do not download or run this file unless you obtained it directly from hyperx.com or hp.com with a verified digital signature.
Cause: Missing Visual C++ redistributables or .NET Framework dependencies.
Solution:
Cause: The rev0010 updater changed the behavior of the mute button. On some Cloud II variants, holding the mute button for 2 seconds toggles sidetone.
Solution: Press and hold the microphone mute button on the USB control box for 2–3 seconds. You should hear a faint beep or see a change in the LED behavior.
| Component | Meaning |
|-----------|---------|
| hyperx | Brand |
| cloudii | Product line (Cloud II) |
| firmwareupdater | Purpose – updates device firmware |
| rev0010 | Revision 0010 of the updater or firmware |
| .exe | Windows executable |
| Context (2021) | Likely compiled or released in 2021 |
While HyperX did release a Cloud II firmware update around 2020–2021 (version 0010), the official filename from HyperX’s website was typically something like Cloud-II-Firmware-Update-0010.exe or CloudII_USB_Firmware_Update_v0010.exe. The longer, underscore-heavy name with “hyperx” at the front is not standard for official HyperX downloads.