Ipm17-002 Motherboard Manual May 2026

| Feature | Specification | | :--- | :--- | | Form Factor | Custom (Fits HP AIO chassis only) | | Socket | LGA 1150 | | Supported CPUs | Intel Haswell (4th Gen) – Celeron, Pentium, Core i3/i5 | | Chipset | Intel H81 (or H61 variant) | | RAM | 2 x SODIMM slots (laptop RAM) – DDR3L-1600 | | Expansion | 1 x Mini PCIe (for WiFi), 1 x PCIe x4 (low profile) | | Storage | 2 x SATA 3.0 (one for HDD, one for optical drive) | | Rear I/O | VGA, HDMI, USB 2.0/3.0, RJ45 (Realtek LAN), Audio |

While the official manual covers safety and installation, experienced techs have noted three omissions:

Since the IPM17-002 lacks a clear silkscreen, the manual provides the definitive jumper map. ipm17-002 motherboard manual

Locating the Jumpers: The jumper block is usually located between the SATA ports and the front panel audio connector.

| Jumper | Pins | Function | | :--- | :--- | :--- | | CLR_CMOS (Labeled JBAT1) | 1-2 (Closed) | Normal Operation | | | 2-3 (Closed) | Clear CMOS (Hold for 10 seconds while PC is unplugged) | | PSWD (Password Clear) | 1-2 (Open) | Normal | | | 1-2 (Closed) | Clear BIOS Password (Boot once, then remove jumper) | | Feature | Specification | | :--- |

Crucial Note from the Manual: To clear the CMOS on the IPM17-002, you must unplug the PSU, remove the coin-cell battery (CR2032), and move the CLR_CMOS jumper. Doing only one of these steps will not reset the BIOS.

Websites like ManualsLib and ManualsPlus archive these legacy files. No display:

Since HP and Compaq don’t prominently host old motherboard manuals individually, use these strategies: