Is your Lava Benco V90 (Model AE9120) stuck on the boot logo? If the phone refuses to boot past the "Benco" or "Lava" screen, you are likely dealing with a common issue known as a "Hang Logo" or "Bootloop." This problem is often caused by software corruption, a failed update, or incompatible app installations.
Fortunately, you can revive your device using the S160 Flash File. This guide provides an overview of the firmware and the steps required to fix your device.
Yes, most stock ROMs are released for free by Lava or community developers. Avoid paid scam sites – search on forums like XDA, NeedROM, or Lava official support.
Why do you need this flash file? The most common symptoms requiring a firmware re-installation include:
Disclaimer: The following information is for educational purposes. Ensure you have the legal right to flash the device. We do not host direct copyrighted files but guide you to official or authorized sources.
File Name: Lava_Benco_V90_AE9120_S160_MTK_SP_Flash_Tool_File.zip (or similar based on chipset)
Key features of the "new" file (2024-2025 release):
Where to find it (search terms for Google/Baidu):
File size: Approximately 1.5 GB to 2.2 GB (compressed).
Contents of the download:
Note: Flashing firmware carries a risk of voiding your warranty or damaging the device if done incorrectly. Proceed at your own risk.
Step 1: Extract the Files Download the Lava Benco V90 flash file and extract it using WinRAR or 7-Zip on your desktop. You should see the scatter file inside the folder.
Step 2: Launch SP Flash Tool
Open the SP Flash Tool folder and run flash_tool.exe as Administrator.
Step 3: Load the Scatter File In the SP Flash Tool interface, click on the "Choose" or "Scatter-loading" button. Navigate to the folder where you extracted the firmware and select the scatter file.
Step 4: Configure for Hang Logo Fix For a Hang Logo issue, it is generally recommended to use the "Firmware Upgrade" or "Download Only" option.
Step 5: Connect the Device Turn off the Lava Benco V90 completely. In the SP Flash Tool, click the "Download" button. Now, connect the switched-off phone to the PC via USB.
Step 6: Flashing Process If the drivers are installed correctly, the tool should detect the phone, and a progress bar will appear. Wait for the process to reach 100%.
Step 7: Completion Once finished, you will see a green circle with a "Download Ok" message. Disconnect the phone, insert the battery (if removed), and power it on. The first boot may take 3-5 minutes as the system rebuilds the cache.
Flashing firmware is a technical process. Ensure you have the following ready:
Note: The following steps are generic for MTK devices like the Benco V90. Always refer to the specific instructions included with your downloaded firmware file.
Is your Lava Benco V90 (Model AE9120) stuck on the boot logo? If the phone refuses to boot past the "Benco" or "Lava" screen, you are likely dealing with a common issue known as a "Hang Logo" or "Bootloop." This problem is often caused by software corruption, a failed update, or incompatible app installations.
Fortunately, you can revive your device using the S160 Flash File. This guide provides an overview of the firmware and the steps required to fix your device.
Yes, most stock ROMs are released for free by Lava or community developers. Avoid paid scam sites – search on forums like XDA, NeedROM, or Lava official support.
Why do you need this flash file? The most common symptoms requiring a firmware re-installation include:
Disclaimer: The following information is for educational purposes. Ensure you have the legal right to flash the device. We do not host direct copyrighted files but guide you to official or authorized sources.
File Name: Lava_Benco_V90_AE9120_S160_MTK_SP_Flash_Tool_File.zip (or similar based on chipset) lava benco v90 ae9120 flash file s160 hang logo new
Key features of the "new" file (2024-2025 release):
Where to find it (search terms for Google/Baidu):
File size: Approximately 1.5 GB to 2.2 GB (compressed).
Contents of the download:
Note: Flashing firmware carries a risk of voiding your warranty or damaging the device if done incorrectly. Proceed at your own risk. Is your Lava Benco V90 (Model AE9120) stuck
Step 1: Extract the Files Download the Lava Benco V90 flash file and extract it using WinRAR or 7-Zip on your desktop. You should see the scatter file inside the folder.
Step 2: Launch SP Flash Tool
Open the SP Flash Tool folder and run flash_tool.exe as Administrator.
Step 3: Load the Scatter File In the SP Flash Tool interface, click on the "Choose" or "Scatter-loading" button. Navigate to the folder where you extracted the firmware and select the scatter file.
Step 4: Configure for Hang Logo Fix For a Hang Logo issue, it is generally recommended to use the "Firmware Upgrade" or "Download Only" option.
Step 5: Connect the Device Turn off the Lava Benco V90 completely. In the SP Flash Tool, click the "Download" button. Now, connect the switched-off phone to the PC via USB. Where to find it (search terms for Google/Baidu):
Step 6: Flashing Process If the drivers are installed correctly, the tool should detect the phone, and a progress bar will appear. Wait for the process to reach 100%.
Step 7: Completion Once finished, you will see a green circle with a "Download Ok" message. Disconnect the phone, insert the battery (if removed), and power it on. The first boot may take 3-5 minutes as the system rebuilds the cache.
Flashing firmware is a technical process. Ensure you have the following ready:
Note: The following steps are generic for MTK devices like the Benco V90. Always refer to the specific instructions included with your downloaded firmware file.