Merlin Gerin Multi 9 Ic 2000 P Manual ✧ «Official»

If you have been searching for the manual because your Ic 2000 P has failed, here is the official recommendation from Schneider Electric’s legacy team:

A: Yes. Contact Schneider Electric technical support with the old catalog number. They will recommend a current TeSys or Multi 9 auxiliary contact (e.g., iACT or A9 series).

First, let’s decode the name:

The "IC2000 P" is typically a 2-pole RCD rated for 25A, 40A, or 63A. Unlike a standard MCB (which protects against overloads/short circuits), the IC2000 P is designed purely for protection against earth faults (ground faults). It disconnects the circuit if current leaks to earth, preventing electrocution and fires.

The Multi 9 series was Merlin Gerin’s flagship system of modular DIN-rail mounted devices, including circuit breakers, residual current devices (RCDs), surge arresters, and contactors. The “Multi” refers to their multifunction capability, while “9” denoted the 9mm per pole modular width standard (though many later units use 18mm or 27mm). Merlin Gerin Multi 9 Ic 2000 P Manual

A: Without seeing your exact manual, generic designations are:

The Merlin Gerin Multi 9 IC2000 P is a high-performance interface relay designed for industrial automation and electrical panel building. It belongs to the renowned Multi 9 range, known for modularity and reliability. The “P” typically denotes a plug-in base or specific coil voltage (often AC). If you have been searching for the manual

This device is used to isolate low-power control signals (e.g., from a PLC) from higher-power loads, providing electrical isolation and signal amplification.

Searching for the manual is not a bureaucratic exercise. It is a safety necessity for three reasons: A: Yes