Moeller Easy512-ac-rc Programming Manual -

⚠️ Do not apply AC voltage to DC-only inputs (e.g., -RC models are AC/DC inputs, but confirm your specific variant).

| Problem | Likely cause | Solution | |---------|--------------|----------| | No outputs | STOP mode | Press RUN button | | Input LED off but voltage present | Wrong input type (DC vs AC) | Check model: AC only | | Program lost after power cycle | Not saved | Save before exiting PROG | | "Overflow" error | Too many connections per rung | Break into multiple rungs | | "No end coil" | Missing END coil | Add END coil at last page | moeller easy512-ac-rc programming manual

The easy512 supports ON-delay, OFF-delay, Pulse, and Flashing timers. ⚠️ Do not apply AC voltage to DC-only inputs (e

Example: ON-delay timer

Programming:

| Step | Action | |------|--------| | 1 | Press OK (insert contact) | | 2 | Select I (input) → I01 → NO | | 3 | Press DOWN (move below contact) | | 4 | Press OK (insert coil) | | 5 | Select Q (output) → Q01 | | 6 | Press OK to confirm | | Problem | Likely cause | Solution |