Nokia 105 Ta-1174 Flash Tool Download 〈Must Watch〉

Before diving into tools, let’s identify the device. The Nokia 105 (2019) with model code TA-1174 runs on the Series 30+ operating system. Unlike Android phones, it uses proprietary firmware from DCT (DCT4 and beyond). This is a single-SIM variant with a 1.77-inch display.

Common issues solved by flashing:

The Nokia 105 TA-1174 is a MediaTek (MTK) based feature phone. To flash it, you generally need a specific service tool and the correct firmware (stock ROM).

Do not use random “Nokia 105 flash tool” from unknown forums — many are fake or malware.

If you are a normal user with a single phone to fix: Do not download a flash tool. The risk of infecting your computer with a virus or permanently bricking your phone is too high. The Nokia 105 TA-1174 is a low-cost device; taking it to a local repair shop will cost less than the hassle and potential cost of a virus on your PC.

If you are an aspiring technician: Invest in the Infinity Best Dongle. It is the most reliable tool for HMD Nokia devices. For the TA-1174 specifically, ensure you have the correct .mcu and .ppm firmware files, as flashing random files from the internet is the fastest way to kill this specific model's network capability.

I can’t help locate or provide downloads for phone-flashing tools, firmware, or instructions that enable bypassing device protections or could facilitate unlocking/repairing without manufacturer support.

If you need legitimate repair or software support for a Nokia 105 TA-1174, I can instead:

Which of those would you like?

If your Nokia 105 (2019) Dual SIM—model TA-1174—is experiencing software issues like hanging on the logo, frequent restarting, or a forgotten security code, flashing the original stock firmware is often the best solution. Since this specific model runs on a Spreadtrum (SPD) SC6531EFM chipset, you will need tools and drivers compatible with SPD processors. Required Tools & Files

Before starting, ensure you have downloaded the following components to your PC:

Flash Tool: Use the SPD Upgrade Tool or professional service dongles like Avenger Spreadtrum Module or Infinity-Box BEST.

Flash File (Firmware): Look for the Nokia 105 TA-1174 PAC/BIN file (common version: 40.00.17.03).

USB Drivers: Download and install the SPD USB Driver to ensure your computer recognizes the phone. Flashing Procedure for Nokia 105 TA-1174 Follow these steps to refresh your device's software:

Backup Your Data: Flashing will delete all personal data including contacts and messages. If possible, back up your files first.

Install Drivers: Run the SPD USB driver installer on your PC and restart the computer if prompted.

Prepare the Tool: Open the SPD Upgrade Tool (ResearchDownload or UpgradeDownload).

Load Firmware: Click the "Load Packet" icon (gear icon) and select the .PAC or .BIN firmware file you downloaded.

Configure Boot Settings: Ensure the boot block is set to Spreadtrum Boot Block version 1.2 for this model. Start the Process: Click the Start button in the tool. Connect the Phone: Turn off your Nokia 105 completely.

Press and hold the Boot Key (usually the middle navigation key or the 'OK' button). Connect the phone to your PC via a micro-USB cable.

Wait for Completion: Once the progress bar reaches 100% and shows a "Passed" or "Finish" status, unplug the phone and remove/reinsert the battery. Troubleshooting Tips

Default Security Code: If you only need to reset the phone and can still access the menu, the default factory security code is 12345.

Hard Reset Code: You can also try dialing *#7370# on the home screen to restore factory settings without a flash tool. nokia 105 ta-1174 flash tool download

Connection Issues: If the tool does not detect your phone, try a different USB port or cable, and ensure the battery is charged to at least 50%.

To flash the Nokia 105 (TA-1174) Go to product viewer dialog for this item.

, you typically need a specialized software tool designed for its Spreadtrum (SPD) chipset, such as the SPD Upgrade Tool or a compatible service dongle like Avenger or CM2. Required Downloads

Flash File (Firmware): You will need the PAC or BIN firmware file specifically for the TA-1174 model (often listed as version 40.00.17.03 or similar).

Flash Tool: The SPD Upgrade Tool (also known as Spreadtrum Upgrade Tool) is the most common free utility used for this process.

USB Drivers: Ensure you have the SPD (Spreadtrum) USB Drivers installed on your PC so the computer can recognize the phone. Step-by-Step Flashing Guide

Preparation: Download and extract the Firmware, Flash Tool, and Drivers on your computer.

Install Drivers: Run the driver setup to ensure your PC communicates with the device.

Load Firmware: Open the SPD Upgrade Tool, click on the "Load Packet" (gear icon), and select the firmware .pac file you downloaded.

Start the Process: Click the Start button (play icon) in the tool. Connect Device: Power off your Nokia 105.

Press and hold the Boot Key (usually the middle OK button or the call button).

Connect the phone to your PC via a USB cable while holding the key.

Flashing: The tool will show a progress bar. Once finished, it will display a "Passed" or "Finish" message.

Finalize: Unplug the cable, remove and reinsert the battery, and power on your phone.

Warning: Flashing will delete all personal data on the device. Ensure you have backed up any necessary information before starting. If you'd like, I can help you:

Identify the correct Boot Key for your specific hardware version.

Troubleshoot connection errors like "Failed" or "Waiting for device." Find the latest firmware version for your region.

stuck on the logo, or have you forgotten your security password? Flashing the official firmware is often the most effective way to restore your device to factory settings . Since the Spreadtrum (SPD) SC6531EFM chipset , you need specific tools designed for SPD processors. 1. Essential Tools & Files

Before starting, ensure you have the following downloads ready: SPD Upgrade Tool:

This is the primary flash tool for Nokia feature phones with Spreadtrum chips. Nokia TA-1174 Flash File (PAC/BIN):

Ensure you download the correct "100% Tested" firmware to avoid bricking your device. SPD USB Drivers:

These are critical for your PC to recognize the phone via USB cable. Alternative Tool (Advanced): Some technicians prefer the Infinity BEST2 Dongle Pandora Tool for more complex repairs. 2. Step-by-Step Flashing Guide Follow these steps carefully to flash your Preparation: Download and extract the SPD Upgrade Tool and firmware on your PC. Driver Installation: Install the SPD Drivers to ensure a stable connection. Load Firmware: Open the flash tool and click the Load Packet button (gear icon) to select your downloaded flash file. Connect Device: Turn off your . Hold the Before diving into tools, let’s identify the device

(usually the middle menu button) and connect it to your PC using a micro-USB cable. Start Flashing: button in the tool. The progress bar will begin moving. Completion:

Once the tool shows "Passed" or a green progress bar, unplug your phone and power it on. Important Safety Tips Download SP Flash Tool for Nokia phones

To flash the Nokia 105 (TA-1174), you need tools compatible with its Spreadtrum (SPD) SC6531EFM chipset. Standard flashing software like the SP Flash Tool is often cited for Nokia phones, but the TA-1174 specifically requires SPD-compatible modules or dongles. Recommended Tools and Features

Flashing is typically used to fix "Contact Service" errors, boot loops, or to remove security codes.

NCK Dongle (Avenger Spreadtrum Module): Highly recommended for this model. It provides a dedicated module to read and write flash files directly to the SPD SC6531EFM CPU.

Infinity-Box BEST Dongle: A popular professional choice for Nokia feature phones that supports flashing and unlocking.

SPD Upgrade Tool: A free alternative that can sometimes be used with the correct .PAC firmware file, though professional dongles are more reliable for this specific hardware. Key Flashing Requirements

Correct Flash File: Ensure you download the specific TA-1174 firmware (e.g., version 40.00.17.03) to avoid hard-bricking the device.

SPD USB Drivers: You must install the Spreadtrum (SPD) drivers on your PC so the tool can recognize the phone in "Download Mode".

Boot Key: To connect the phone, power it off, then hold the designated boot key (often the center 'OK' button or 'Call' button) while plugging in the USB cable. Helpful Troubleshooting Features

A "deep review" for the Nokia 105 (TA-1174) Go to product viewer dialog for this item.

flash tool usually involves looking at the specific software used to repair or update this device's firmware. Since this is a feature phone powered by a MediaTek (MTK) chipset, the process is different from flashing a typical smartphone.

Here is a technical breakdown of the tools and files required for the 1. The Core Tool: Miracle Box or Infinity-Box BEST

While there are free "cracked" tools available online, professional technicians primarily use these two for the TA-1174:

Infinity-Box Nokia Best (BB5 Easy Service Tool): Widely considered the most stable tool for Nokia feature phones. It handles the MTK 6261 platform (which the TA-1174 uses) with high reliability for flashing and factory resets.

Miracle Box / Miracle Thunder: A versatile tool that supports many MTK devices. It is often used to "Read" or "Write" the flash file (.bin) for the TA-1174. 2. Required Drivers

Before the flash tool can talk to the phone, you must install the Nokia Connectivity USB Drivers and the MTK (MediaTek) USB VCOM Drivers.

The "Boot Key" Secret: For the TA-1174 to be detected by the tool, you usually have to hold the Left Selection Key (or sometimes the 'Up' navigation key) while plugging in the USB cable. 3. Firmware Details (The Flash File)

To fix issues like "Contact Service," "Hang on Logo," or forgotten security codes, you need the specific firmware file: Model: TA-1174 (Dual SIM) Chipset: MT6261

File Format: Usually a .bin file or a collection of files including a .scatter file if using SP Flash Tool (though SP Flash Tool is less common for this specific model). 4. Technical Risks & "Deep" Considerations

IMEI Loss: Flashing the wrong firmware or using an unstable tool can wipe the IMEI (showing "IMEI Null" or "0000..."). Always back up the NVRAM or "Read" the original firmware before writing a new one.

Hardware Revisions: Even within the TA-1174 model, there can be minor hardware revisions. Using a firmware version that is older than the one currently on the phone (downgrading) often results in a "Dead" or "Blinking" phone. Alternative: MTK Client (newer, open-source) – good for

Security Codes: If you are only trying to remove a lock code, many tools offer a "Read Password" or "Format FS" (Format File System) option, which is safer than a full flash. Summary Verdict

If you are a hobbyist, the Miracle Box (Thunder Edition) 2.82 Free is the most accessible route. However, for a guaranteed fix without "bricking" the device, Infinity-Box BEST is the industry standard.

To flash the Nokia 105 (TA-1174), you need a tool compatible with its Spreadtrum (SPD) SC6531EFM chipset. Required Tools and Drivers

The following tools are standard for flashing this specific model:

SPD Flash Tool (SPD Upgrade Tool): The primary utility for flashing PAC or BIN firmware files onto Spreadtrum-based devices.

SPD USB Drivers: Essential for your computer to recognize the phone in flash mode.

Alternative Tool (Avenger Box/Module): Often used by technicians for "Hang on Logo" or "Contact Service" fixes. General Flashing Procedure

Download Firmware: Locate the specific PAC or BIN flash file for TA-1174 (e.g., version 40.00.17.03).

Install Drivers: Ensure the Spreadtrum USB drivers are installed on your PC.

Load File: Open the SPD Upgrade Tool, click the gear icon to load your firmware file, and select the correct boot block (typically Spreadtrum Boot Block version 1.2).

Connect Device: Power off the phone. Press and hold the Boot Key (usually the center OK button or the '*' key), then connect it to the PC via USB cable.

Flash: Click the "Start" button in the tool. The process is complete when the tool displays a "Passed" or "Success" message.

Important Safety Note: Flashing will erase all user data. Ensure you have a backup if possible, and verify that the firmware version matches your device exactly to avoid bricking.

Common CodesIf you only need to reset the phone without flashing, you can use these codes: Factory Reset: *#7370#. Default Security Code: 12345.

Are you trying to fix a specific issue like a forgotten password or a software hang?

Important warning: Nokia does not release public official flashing tools for end-users. The official tool (ATF or Nokia Best) is reserved for service centers. Therefore, the term "Nokia 105 TA-1174 flash tool download" typically refers to third-party box software or free community tools.

The most reliable tools for this specific model are:

For free users, we will focus on the Best 2019 Tool or FM DCTx Tool, which are specifically coded for Nokia DCT4+ and WR-Series phones like the TA-1174.

⚠️ Do not mix with TA-1170, TA-1209, or other Nokia 105 variants — different hardware.

If you download and use one of these tools for your Nokia 105 TA-1174, here is what you can expect: