Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum -
Nokia_RM1035_MTK_Driver_x64_v3.0.1504.0.zip – Always verify file size (approx 12-15 MB).
Before diving into drivers, let’s recap the hardware:
Unlike Qualcomm-based Nokia devices, the RM-1035 uses MediaTek’s proprietary Preloader and DA (Download Agent) USB modes. These modes require signed but legacy VCOM (Virtual COM Port) drivers to function on Windows 10 and Windows 11 64-bit systems.
| Problem | Solution (Sourced from GSM-Forum threads) |
| :--- | :--- |
| “The third-party INF does not contain digital signature information” | You must boot Windows into Disable Driver Signature Enforcement mode. It is non-negotiable for MTK preloader drivers. |
| Driver installs, but SP Flash Tool gives “ERROR: STATUS_BROM_CMD_FAIL” | Your USB cable is poor quality. Use a thick, short USB 2.0 cable. Also, try a USB 2.0 port (not USB 3.0 blue port). |
| Device shows as “USB Serial Converter” instead of VCOM | Uninstall the device, check “Delete driver software”, then re-run the installer from scratch. Also, try different preloader key combo (Volume Up + Power). |
| Phone disconnects/reconnects repeatedly | This is normal for MT6580 preloader – it has a 5-second timeout. You need to click “Download” in SP Flash Tool before connecting the phone. |
| Windows 11 22H2+ specific error: “Code 52 – unsigned driver” | Use Driver Signature Enforcement Overrider (DSO) or boot into Test Mode via command line: bcdedit /set testsigning on | Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum
Q1: Does this driver work on Windows 7 64-bit?
Q2: Can I use a Virtual Machine (VMware/VirtualBox) on 64-bit host?
Q3: My Nokia RM-1035 is hard-bricked (no preloader mode at all). Will the driver help? Nokia_RM1035_MTK_Driver_x64_v3
Q4: Is there a Linux alternative?
Since you are downloading from GSM forums (which sometimes host user-uploaded files), follow these rules:
Specs for reference:
Please ensure you are using a good quality USB 2.0 port and a short data cable. USB 3.0 ports often cause preloader dropouts.
While seemingly a memory error, this is frequently caused by an incorrect driver installing the "Microsoft MTP" driver instead of the "VCOM" driver. The flashing tool cannot interface with the MTP protocol. The solution requires forcing the VCOM driver installation manually as described in Section 5.2.
