When you extract a typical RM-1190 30.00.11 service ROM, you find:
| File Pattern | Purpose |
|--------------|---------|
| MBR.bin | Master Boot Record – partition table |
| boot.img | Kernel + ramdisk |
| system.img | Android 11 Go system (squashfs/EROFS) |
| vendor.img | Qualcomm-specific blobs (audio, camera, sensors) |
| modem.bin | Baseband firmware (for MTK – the 2.2 uses MediaTek MT6761 Helio A22) |
| lk.bin | Little Kernel bootloader |
| tee.img | Trusted Execution Environment (Widevine L1 likely present) |
| userdata.img | Empty userdata template |
Note: The Nokia 2.2 is MediaTek-based (MT6761), not Qualcomm. This means flashers must use SP Flash Tool or OST LA 6.x, not QFIL.
No. Each RM number corresponds to a different hardware variant. Flashing an incorrect model will hard-brick the device.
Flashing is a delicate process. Do not proceed without the following:
The Nokia RM-1190 is the international variant of the Nokia 1, launched in 2018. It runs on Android Go (based on Android 8.1 Oreo Go Edition), optimized for 1GB of RAM and 8GB of storage. Key specifications:
The device uses a MediaTek chipset, which means it requires SP Flash Tool (Smart Phone Flash Tool) for firmware flashing, not Odin or iTunes.
In the world of legacy mobile devices, few names command as much respect as Nokia. The Nokia RM-1190, also known as the Nokia 2 (2017) , remains a popular choice in emerging markets and as a backup device due to its legendary battery life and durable build. However, like any smartphone, it is susceptible to software issues such as boot loops, hanging on the logo, IMEI corruption, and performance lag.
The solution to these problems often lies in a specific firmware package: Nokia RM-1190 Flash File 30.00 11. If you have encountered this term while trying to revive your device, you are in the right place. This article provides a deep dive into what this file is, why version 30.00 11 matters, where to find it safely, and a step-by-step guide to flashing it onto your device.
The Nokia RM-1190 flash file 30.00.11 is an essential rescue tool for anyone facing software failure on their Nokia 1. Whether you are a professional technician or a DIY user, following the steps above will help you successfully restore your device to a clean, working state.
Remember:
If you found this guide helpful, bookmark it or share it with other Nokia 1 users. For persistent hardware issues (e.g., dead USB port, damaged eMMC), consider professional repair services.
Disclaimer: Flashing your phone involves risk. The author and website are not responsible for any damage resulting from improper use of flash files or tools. Proceed at your own risk.
The Nokia RM-1190 (Nokia 150) Flash File version 30.00.11 is the essential system software used to repair, update, or unbrick this specific feature phone model. 📱 Software Specifications Model: Nokia 150 Type Number: RM-1190 Version: 30.00.11 Platform: MediaTek (MTK)
Language Support: Usually includes English, Arabic, and regional packs (Global). 🛠️ When to Use This Flash File
Flashing this firmware is a common solution for several device issues: Bootloop: The phone gets stuck on the Nokia logo. Security Code: Bypassing a forgotten lock code. White Screen: Fixing display software glitches.
Contact Service: Resolving "Contact Service" error messages.
Dead Recovery: Reviving a phone that won't turn on after a failed update. 🔧 Prerequisites for Flashing
To successfully install the RM-1190 30.00.11 file, you will need: Hardware: A standard Micro-USB data cable.
Drivers: Nokia Connectivity Drivers and MTK USB VCOM Drivers. Flashing Tool: Common tools include: Miracle Box (or Miracle Thunder) Infinity CM2MTK Best Smart Tool (BST) nokia rm-1190 flash file 30.00 11
Battery: At least 50% charge to prevent mid-process shutdown. 📝 General Flashing Steps
Install Drivers: Ensure your PC recognizes the device in "MTK USB Port" mode.
Load Files: Open your flashing tool and select the RM-1190 scatter or firmware files. Power Off: Turn the phone off completely.
Connect: Click "Write" or "Start" in the tool, then connect the phone while holding the boot key (usually the center OK button or the call button).
Wait: Do not disconnect until the tool shows a "Success" or "Pass" message.
⚠️ Warning: Flashing will erase all user data, including contacts and messages. Ensure you have backups if possible. Using the wrong RM version (e.g., trying to flash RM-1190 files onto an RM-1187) can permanently hard-brick the device.
If you are looking for a download link or need help with a specific error code during the flash process, let me know: What tool are you currently using? (Miracle, CM2, etc.) What is the specific error you are trying to fix? Do you need the driver installation guide?
I can provide more detailed troubleshooting steps once I know your setup!
is a "back-to-basics" feature phone designed for reliability, long battery life, and simplicity Design & Durability:
It features a classic, lightweight (81g) polycarbonate body with a "built-in colour" design that hides scratches. Its 2.4-inch QVGA display is bright and easy to read. Battery Life:
One of its strongest selling points is the 1020 mAh removable battery, providing up to 22 hours of talk time and nearly a month on standby. Functionality:
It includes a VGA rear camera with flash, FM radio (wireless on some versions), and a built-in MP3 player. The Verdict:
While it lacks modern features like 4G or internet browsing, it is an excellent secondary phone or a primary device for users who only need voice calls and SMS. About the Flash File (30.00.11)
Searching for the "flash file" usually means you are trying to the device. Fixing Errors:
Users often use this firmware (like version 30.00.11 or newer) to resolve issues like the "Contact Service"
error, a "dead" (won't turn on) phone, or missing menu icons. Software Tools: Flashing this specific model often requires professional service tools such as InfinityBox Chinese Miracle-2 (CM2) Quick Specifications 2.4-inch QVGA (240 x 320) Connectivity 2G (GSM 900/1800), Bluetooth 3.0 4MB internal, expandable via microSD up to 32GB 0.3MP (VGA) with LED Flash Special Features Snake Xenzia, Dual SIM, Built-in Torch
Are you looking to download this file to fix a specific software error on your phone?
To flash the Nokia 150 (RM-1190) Go to product viewer dialog for this item.
with firmware version 30.00.11, you need the specific flash file, the correct USB drivers, and a compatible flashing tool like Infinity-Box BEST or a similar service tool. 1. Preparation & Downloads When you extract a typical RM-1190 30
Before starting, ensure your phone's battery is charged to at least 60% to prevent it from turning off mid-process. Flash File: Download the Nokia 150 RM-1190 Go to product viewer dialog for this item.
firmware (v30.00.11 or later) from reputable mobile firmware repositories like AllFlashFiles or GSM Forum
USB Drivers: Install the Nokia USB Drivers or MTK USB Drivers (the Go to product viewer dialog for this item.
uses an MTK chipset) to ensure your PC recognizes the device.
Flashing Tool: Professionals often use the Infinity-Box BEST (BB5 Easy Service Tool) or Unlock Tool. 2. Flashing Procedure
The general steps for using a tool like Infinity BEST are as follows:
Extract Files: Extract the downloaded firmware (.zip or .rar) to a folder on your PC. Open Flash Tool
: Run your flashing software (e.g., Infinity BEST) as an administrator. Select Model: In the tool's interface, select the Go to product viewer dialog for this item. model from the dropdown menu.
Load Firmware: Locate and select the MCU, PPM, and CNT files from your extracted firmware folder. Connect Device:
Turn off your phone and remove the battery for a few seconds, then reinsert it (but do not turn it on). Click the Flash or Write Firmware button in the tool.
Connect the phone to the PC using a standard micro-USB cable.
Complete Flashing: The tool will automatically detect the phone and begin the process. Wait until the progress bar reaches 100% and displays a "Done" or "Flash Completed" message. 3. Post-Flashing Tips
Contact Service Error: If the phone displays "Contact Service" after flashing, you may need to use a tool to "Repair Security" or "Reset to Factory" within the flashing software.
Factory Reset: If the phone is stuck after the flash, you can try a hard reset by typing *#7370# (default security code is 12345).
Warning: Flashing firmware can permanently damage your device if interrupted or if the wrong file is used. Proceed with caution. Download SP Flash Tool for Nokia phones
Nokia RM-1190 Flash File 30.00.11: Ultimate Guide to Download and Installation
The Nokia RM-1190, commonly known as the Nokia 150 Dual SIM, is a reliable feature phone favored for its simplicity and battery life. However, software glitches, stuck logos, or forgotten passwords can sometimes render the device unusable. Using the Nokia RM-1190 flash file version 30.00.11 is the most effective way to restore your device to its factory state and resolve these technical issues. Understanding the Nokia RM-1190 Flash File
A flash file, or firmware, is the core operating system that runs on your mobile hardware. Version 30.00.11 is one of the most stable updates for the Nokia 150. Flashing this specific file can fix various software-related problems, including: White screen or "Contact Service" errors. The phone being stuck on the Nokia logo during boot. Security code or pattern lock bypass. Fixing bugs in the user interface or messaging system.
Restoring a "dead" phone caused by previous failed software updates. Prerequisites for Flashing The Nokia RM-1190 is the international variant of
Before you begin the flashing process, ensure you have the following tools and conditions met to avoid "bricking" your device:
Backup Your Data: Flashing will erase all internal memory, including contacts and messages. Battery Level: Ensure your phone has at least 50% charge.
USB Cable: Use a high-quality micro-USB cable for a stable connection.
Drivers: Install the Nokia MTK (MediaTek) USB drivers on your PC.
Flashing Tool: You will need a compatible tool such as Miracle Box, Infinity-Box BEST, or a free alternative like the MTK Flash Tool. How to Install Nokia RM-1190 Flash File 30.00.11 Follow these steps carefully to flash your Nokia 150:
Step 1: Download and ExtractDownload the Nokia RM-1190 version 30.00.11 firmware package and your preferred flashing tool. Extract both files to an easy-to-reach folder on your desktop.
Step 2: Install USB DriversIf you haven’t already, install the Nokia connectivity drivers. This allows your computer to communicate with the phone while it is in "Boot Mode."
Step 3: Launch the Flash ToolOpen your flashing software (e.g., Miracle Box). Select the "MTK" tab and then the "Write" option.
Step 4: Load the FirmwareClick on the folder icon or the "Scatter/File" button and navigate to the extracted RM-1190 folder. Select the file ending in .bin or the relevant scatter file provided in the package.
Step 5: Connect the PhonePower off your Nokia 150 completely. Click the "Start" button on the software tool. While holding the "OK" button or the "Boot Key" on the phone, connect it to the PC via USB.
Step 6: Flashing ProcessThe software should detect the device and start the writing process. You will see a progress bar. Do not disconnect the cable or touch the phone during this time.
Step 7: FinalizeOnce the tool displays a "Success" or "Write Complete" message, disconnect the USB cable. Remove the battery, reinsert it, and power on the device. Conclusion
Updating or repairing your device with the Nokia RM-1190 flash file 30.00.11 is a straightforward process if you follow the correct steps. It breathes new life into your Nokia 150, ensuring the software runs smoothly and securely. Always ensure you are downloading firmware from a reputable source to avoid corrupted files that could damage your hardware.
Nokia 150 (RM-1190) is a classic 2G feature phone designed for users who prioritize extreme battery life and basic communication over modern smartphone features. The flash file 30.00.11
(and its later successor v50.00.11) is essential firmware used to repair common software issues such as the "Contact Service" error, white screen bugs, or "dead" units that won't boot. Flash File Performance: 30.00.11 Overview
This specific firmware version is a critical maintenance tool for the RM-1190 model.
: It is primarily used to restore functionality to phones showing the "Contact Service" error or those stuck in a boot loop. Repair Capabilities
: Fixes software-related "dead" states and can be used to remove forgotten PIN locks via a factory reset using tools like InfinityBox or Best Dongle.
: While v30.00.11 is a standard stable release, some technicians recommend updating to
if the "Contact Service" issue persists after a standard flash. Device Review: Nokia 150 (RM-1190)
The hardware itself is a no-frills "candy bar" phone that excels as a backup device or for those looking to "unplug."