This manual describes the information necessary for developing the application software of the following FANUC CNC, incorporating FOCAS1/2 CNC/PMC Data window library.
Use this manual together with the operator's manual of the following CNC.
4. BIOS Setup
The BIOS setup utility allows you to configure the motherboard settings. To enter the BIOS setup, press the key during boot-up. pegatron motherboard m2n78la manual top
If you are searching for the manual to upgrade this board, the top revision (Rev 1.xx) has a hidden limitation: It does not support AM3 CPUs natively. Stick to Athlon 64 X2 6000+ (Brisbane) or Phenom 9150e (low power). Do not try a Phenom II. The main menu displays the basic system information
The main menu displays the basic system information. pegatron motherboard m2n78la manual top
Since we cannot embed an image, here is the textual map of the board. Hold the board with the I/O ports facing left.
| Component | Location (Approx) | Jumper Name | Default Setting | | :--- | :--- | :--- | :--- | | CMOS Reset | Bottom edge, left of SATA ports | CLR_CMOS | Pins 1-2 | | BIOS Config | Near the Super I/O chip | PSWD (Password) | Pins 1-2 (Normal) | | FSB Selection | Under the CPU socket (rare) | FSBSEL | No jumper = Auto | | Audio Header | Bottom left corner | F_AUDIO | Standard AC’97/HD |
Note: If you move the PSWD jumper to pins 2-3, the board will ignore the BIOS password.