Yes – verified by hundreds of Canon G2110 owners. A reset using the Service Tool v.4900 works permanently until the pad fills up again, which typically takes 6–18 months depending on usage. When the error returns, simply repeat the reset process. However, after the second or third reset, you must physically clean the pad to avoid leaking.
Do not pay a repair shop $80 for this. The Service Tool is free (though tricky to find), and the process takes 5 minutes.
The official tool is not a virus, but many downloads online include malware. Always scan downloaded files with Windows Defender or Malwarebytes. A verified hash for ST4900 is available on service forums. resetear impresora canon g2110 verified
Resetting the counter is only half the solution. A verified long-term fix involves cleaning or replacing the waste ink pads. Here is a maintenance guide:
This ensures no leakage occurs, making your resetear impresora canon g2110 truly verified and safe. Yes – verified by hundreds of Canon G2110 owners
If you followed the verified method but still cannot reset your Canon G2110, consider these causes:
| Problem | Solution | |---------|----------| | Wrong Service Tool version | Use ST4900, ST5200, or ST4720. Version 4000 does not support G2110. | | Printer not in Service Mode | Repeat the button sequence slowly. The green LED should flash in a pattern, not stay solid. | | Driver issue | Install the official Canon G2110 driver before using the tool. | | USB connection problem | Try a different USB port, cable, or restart PC. | | Real physical overflow | If ink has leaked into the printer bottom, you must physically replace or wash the waste ink pads before resetting. | La luz sigue parpadeando:
| Problem | Quick Fix | |---------|------------| | Service tool doesn’t detect printer | Re-enter service mode; try USB 2.0 port | | Error returns after a week | Physical waste ink pad is truly full — replace or clean pads | | Printer shows “5B00” again | Use “EEPROM clear” option in tool (advanced) | | Buttons unresponsive after reset | Power cycle + remove USB, wait 1 min |
Yes, if the printer is still under warranty, resetting the counter yourself voids it. Official policy requires you to send the printer to Canon for waste pad replacement.
🧙♂️ You’ll know it worked if the screen (if any) stays blank and power light is steady.