Most users fix this error by performing a completely fresh installation of SKSE.
1. Download the Correct Version: Go to the SKSE Official Website.
2. Install Manually (Recommended for this error): Mod Managers (Vortex/Mod Organizer 2) sometimes fail to hook the executable properly. Try a manual install to rule this out.
3. Verify the Install:
Inside your Skyrim folder, ensure skse64_loader.exe is sitting right next to SkyrimSE.exe.
The “SKSE version 0000” error is frustrating, but it’s almost always a simple mistake—wrong launcher, missing root files, or an antivirus overreach. By following the steps above, you’ll have RaceMenu working again in under 10 minutes.
Once fixed, you’ll be back to sculpting the perfect Dragonborn with thousands of sliders, overlays, and presets. Happy modding, and may your frames be high and your crashes few.
Have another solution that worked for you? Drop it in the comments below to help fellow adventurers.
The RaceMenu error "You are running SKSE version 0.0.0.0" occurs when the mod cannot detect a running instance of the Skyrim Script Extender (SKSE). This usually means the game was launched without SKSE or the extension failed to initialize. Core Solutions
Launch via SKSE: You must launch Skyrim using skse64_loader.exe (located in your Skyrim root folder) rather than the standard Steam launcher or SkyrimSE.exe.
Update SKSE Scripts: A common mistake is installing the SKSE .exe and .dll files but forgetting to copy the Data/Scripts folder from the SKSE archive into your game's Data folder.
Verify Versions: Ensure your SKSE version matches your specific Skyrim executable version (e.g., Skyrim 1.6.1170 requires SKSE 2.2.6). Check your game version by right-clicking SkyrimSE.exe -> Properties -> Details.
Mod Manager Configuration: If using Vortex or Mod Organizer 2, ensure you have set the SKSE loader as the primary executable to run the game. Troubleshooting Steps
Before diving into complex fixes, ensure you haven't missed the obvious. Many players skip this section and spend hours chasing ghosts.
The "You are running SKSE version 0000" error is not a death sentence for your modded Skyrim. It is a communication breakdown between RaceMenu and SKSE – usually caused by:
By following the methods above – starting with a clean reinstall (Method 1), checking file conflicts (Method 2), and verifying version parity (Method 5) – you will resolve the error 99% of the time.
Once the error is gone, RaceMenu will load properly. You’ll see your custom sliders, overlays, and sculpting tools return. Your character creator will be fully unlocked, and that frustrating red warning will be nothing but a memory.
Now go forth, Dragonborn – and create the character you always envisioned.
Further Resources:
Last updated: 2026. Always check mod pages for the latest versions. skyrim racemenu error you are running skse version 0000 link
How to Fix the "RaceMenu Error: SKSE Version 0.0.0.0" in If you are seeing the error "You are running SKSE version 0.0.0.0" while trying to use it means the mod cannot detect the Skyrim Script Extender (SKSE)
. This doesn’t necessarily mean SKSE isn't installed; it usually means it isn't or was installed incorrectly. 1. Launch Skyrim via the SKSE Loader
The most common cause of this error is launching the game through the standard Steam "Play" button or the default SkyrimSE.exe launch the game using skse64_loader.exe located in your Skyrim root directory. Mod Managers : If you use Mod Organizer 2 , ensure you have added skse64_loader.exe
as a tool and are launching it directly from within the manager. 2. Verify Version Matching
Skyrim versions changed significantly with the "Anniversary Edition" (AE) updates. Even if you didn't buy the AE upgrade, your game version might still be 1.6+. Racemenu SKSE V 0.0.0.0 error - Nexus Mods Forums
This error indicates that is not detecting the Skyrim Script Extender (SKSE) , causing RaceMenu to think it isn't running at all. Immediate Solutions Launch via SKSE: start the game using skse64_loader.exe
(located in your Skyrim folder) rather than the standard Steam launcher or SkyrimSE.exe Run as Administrator: Right-click skse64_loader.exe Properties > Compatibility , and check "Run this program as an administrator". Verify Version Match:
Ensure your SKSE version matches your game’s "Product Version" (right-click SkyrimSE.exe > Properties > Details): Skyrim v1.6.1170+: Requires SKSE v2.2.6 (Anniversary Edition build). Skyrim v1.5.97: Requires SKSE v2.0.20 (Special Edition build). Common Fixes for Mod Managers
What is the "Skyrim racemenu error you are running skse version 0000 link" issue?
The "Skyrim racemenu error you are running skse version 0000 link" error is a common problem faced by Skyrim players who use the Skyrim Script Extender (SKSE). This error occurs when the player tries to access the character creation menu (racemenu) in Skyrim, but the game crashes or displays an error message.
What causes the "Skyrim racemenu error you are running skse version 0000 link" issue?
The error is usually caused by a version mismatch between the SKSE version installed on the player's system and the version expected by the game. Specifically, the error message indicates that the player is running SKSE version 0000, which is an outdated or invalid version.
How to fix the "Skyrim racemenu error you are running skse version 0000 link" issue?
To resolve this issue, follow these steps:
Additional troubleshooting steps
If the above steps don't resolve the issue, you can try:
Conclusion
The "Skyrim racemenu error you are running skse version 0000 link" issue can be frustrating, but it's usually resolvable by updating SKSE to the latest version, checking version compatibility, or disabling and reinstalling SKSE. If you're still experiencing issues, try additional troubleshooting steps to identify and resolve the problem. Happy gaming! Most users fix this error by performing a
The "SKSE version 0.0.0.0" error is a common issue where RaceMenu cannot detect your Skyrim Script Extender (SKSE), usually because the game was launched incorrectly or the scripts were not properly installed. Immediate Fixes
Launch via SKSE: Do not start the game through Steam or the standard SkyrimSE.exe. Use the skse64_loader.exe in your game folder.
Install Scripts Manually: Mod managers (like Vortex) often fail to install the Data/Scripts folder from the SKSE archive. Manually copy the .pex files from the SKSE zip into your Skyrim Special Edition/Data/Scripts folder.
Run as Admin: Right-click skse64_loader.exe and select Run as Administrator to ensure it has permission to hook into the game. Troubleshooting Checklist RaceMenu Error(s): you are running SKSE version 0.0.0.0
The "RaceMenu Error(s): You are running SKSE version 0.0.0.0" message typically indicates that while RaceMenu is loaded, it cannot detect or communicate with the Skyrim Script Extender (SKSE). This is often due to launching the game incorrectly, version mismatches, or file permission issues. Primary Causes of the 0.0.0.0 Error
Incorrect Launcher: The most common cause is launching Skyrim through Steam or the standard SkyrimSE.exe rather than the skse64_loader.exe.
SKSE Version Mismatch: Your SKSE build must match your specific Skyrim game version (e.g., v1.6.1170 requires SKSE v2.2.6).
Incomplete Installation: SKSE requires some files in the main game folder and others (scripts) in the Data/Scripts folder. If these aren't both present, the version check fails.
Windows Permissions: Installing Skyrim in C:\Program Files (x86) can lead to Windows blocking SKSE's script injection as a security measure. How to Fix the RaceMenu SKSE Error 1. Launch via the SKSE Loader
Always start your game using skse64_loader.exe. If you use a mod manager, ensure it is configured to use the SKSE executable as the primary launch tool.
Vortex users: On the Dashboard, find the SKSE logo and select "Make Primary".
MO2 users: Select "SKSE" from the dropdown menu next to the "Run" button. 2. Verify Version Compatibility
Ensure your SKSE version aligns with your game executable. You can find your game version by right-clicking SkyrimSE.exe in your Steam folder and selecting Properties > Details.
Download the matching build from the official SKSE Silverlock site.
Remember that "Special Edition" and "Anniversary Edition" (AE) labels on the SKSE site refer to the game's version number, not just whether you bought the AE DLC. 3. Perform a Clean SKSE Reinstallation
If the error persists, manually reinstall SKSE to ensure all scripts are in the correct location.
The error "RaceMenu Error(s): You are running SKSE version 0.0.0.0" typically means Skyrim is failing to detect the Skyrim Script Extender (SKSE) entirely, even if you have it installed. This most often happens because the game was launched through the standard Steam or Skyrim launcher instead of the SKSE loader. Common Fixes
Launch via SKSE Loader: You must start the game using skse64_loader.exe found in your Skyrim installation folder, rather than the "Play" button in Steam. When prompted, choose "Replace files in the destination"
Run as Administrator: Right-click skse64_loader.exe, select Properties, go to the Compatibility tab, and check "Run this program as an administrator".
Check Installation Path: Ensure SKSE files (like skse64_1_6_1170.dll and skse64_loader.exe) are in the main Skyrim directory where SkyrimSE.exe is located, not inside the Data folder.
Verify Version Match: Ensure your SKSE version exactly matches your Skyrim game version (e.g., Skyrim 1.6.1170 requires SKSE 2.2.6). You can find the latest builds on the official SKSE Silverlock site. Advanced Troubleshooting
Mod Manager Configuration: If using Vortex or Mod Organizer 2, ensure the "Skyrim Script Extender" tool is correctly pointed to the skse64_loader.exe and is the primary way you launch the game.
Missing Scripts: The 0.0.0.0 error can also trigger if the .pex script files included with SKSE weren't copied into your Data/Scripts folder.
Antivirus Interference: Sometimes Windows Defender or third-party antivirus software blocks SKSE from hooking into the game. Try adding the Skyrim game folder as an exclusion. Skyrim Script Extender (SKSE)
RaceMenu Error stating that you are running SKSE version 0.0.0.0 is a common issue in the modding community, typically indicating that the Skyrim Script Extender (SKSE)
is either not running at all or has been incorrectly installed
. When this error occurs, RaceMenu cannot access the essential functions provided by SKSE, resulting in limited customization options or a complete failure of the mod’s advanced features. Primary Causes of the Error Incorrect Launcher
: The most common reason for this error is launching the game through the standard SkyrimSE.exe or the Steam launcher instead of using the skse64_loader.exe Installation Mismatch
: SKSE requires files to be placed in the main Skyrim game folder (root directory) as well as the folder. If scripts are missing from the Data/Scripts
directory, the game may fail to recognize the running version. Version Incompatibility
: If your game version (e.g., v1.6.1170) does not exactly match the SKSE build version (e.g., v2.2.6), the script extender will fail to hook into the game correctly. Mod Manager Configuration : Sometimes mod managers like Mod Organizer 2
may not be correctly configured to use the SKSE loader, or they may point to an incorrect installation path. Recommended Solutions RaceMenu Error(s): you are running SKSE version 0.0.0.0
This is a comprehensive troubleshooting guide for a specific and highly frustrating error in The Elder Scrolls V: Skyrim (and Skyrim Special Edition/AE).
SKSE (Skyrim Script Extender) is a tool that allows mods like RaceMenu to run complex scripts. RaceMenu checks which SKSE version you have installed.
Version 0000 is not a real version number. It’s RaceMenu’s way of saying: “I tried to communicate with SKSE, but I received nothing back.”
In other words, RaceMenu cannot detect SKSE at all. This usually means:
