The WS-1958BT is a 2-way car speaker system with Bluetooth input, designed for in-car audio upgrade. It includes a woofer and a tweeter for balanced mid/bass and high-frequency reproduction, passive crossover network, and mounting hardware. Typical uses: replace factory speakers, add better clarity and bass responsiveness.
The WS-1958BT is a versatile, high-power Bluetooth car audio speaker system designed for vehicles without modern infotainment systems. It typically features:
Before using, please verify your package includes: the main speaker unit, a mounting bracket/strap kit, a remote control (battery included), a power cable (usually 12V–24V car adapter), and a short AUX cable.
Plug the 12V DC cable into your car’s cigarette lighter port. Do not use a 24V truck socket unless you have a step-down converter. The WS-1958BT requires 12V DC (center pin positive, outer sleeve negative). Turn the vehicle ignition to ACC or ON position. The speaker will power on with a voice prompt: “Welcome to WS Music Speaker.”
If you require the original manufacturer’s ws-1958bt music car speaker manual in PDF form, check these locations:
Alternatively, bookmark this page. We update it whenever new firmware versions or corrections are released. ws-1958bt music car speaker manual
The WS-1958BT is a popular aftermarket car accessory that combines a powerful Bluetooth speaker with decorative LED lighting. Unlike a full car stereo replacement, this unit is designed to sit on your dashboard, visor, or cup holder, providing enhanced audio for music and calls without modifying your vehicle's factory wiring. It is often sold under various generic brand names but follows a standard operating logic.
If you absolutely need the original PDF, try searching on Manualslib.com or Manuals.plus using just WS-1958 (leave off the BT). Many generic units share manuals.
Long-press the Mode button (M) or toggle the power switch, usually located on the "trunk" or bottom of the car. Bluetooth Mode:
Switch to Bluetooth mode. Open your phone's Bluetooth, search for "WS-1958BT", and pair. It supports hands-free calling.
Switch to FM mode. Short-press the Play/Pause button to search for stations. Mode Switching: The WS-1958BT is a 2-way car speaker system
Short-press the "M" button to toggle between Bluetooth, FM radio, TF card, and USB input. Volume/Track Control:
Long-press volume buttons to change volume; short-press to skip to the next or previous track. Selfie Mode:
Some versions support Bluetooth selfie, activated via button combination. 2. Charging and Battery
Connect the USB power cable (usually included) to a 5V charging source. LED Indicator: A charge indicator light typically turns on while charging. Play Time: Approximately 2–3 hours depending on volume. Battery Capacity: Built-in 18650 battery (often 1200mAh to 1800mAh). 3. Specifications Output Power: 3 Watts (6W total) or 2 Bluetooth Version: Frequency Range: 100-18KHz. Connectivity: Bluetooth, TF Card, USB Drive, AUX (audio line-in). Horn/Driver: 2 x 52mm Drivers (External Magnetic). 4. Troubleshooting Speaker does not turn on: Charge the device for at least 2 hours. Bluetooth not connecting:
Turn the speaker off and on again, ensure no other device is connected. FM radio reception is poor: Plug in the AUX/USB cable, as it acts as an antenna. Before using, please verify your package includes: the
Note: This information is based on supplier datasheets for the EONKO/WSTER WS-1958BT Car Shape Speaker. WS-1958BT - Car MODEL SPEAKER
Warning: Ensure your vehicle’s ignition is OFF before beginning wiring.
The WS-1958BT is a versatile car audio accessory, often recognized by its classic, vintage aesthetic combined with modern Bluetooth connectivity. Designed for music lovers who want a plug-and-play audio solution, it typically functions as a standalone speaker or an FM transmitter, depending on the specific chassis configuration.
Key Features Typically Include: