Epson 1390 - Resetter

Once you have the software (let’s assume you have the standard Chinese/English Adjustment Program), follow these steps precisely.

Before you run the software, you need to prepare the printer and your computer.

1. Address the Physical Waste Ink

2. Printer Connection

3. Disable Antivirus (Temporarily)

If you are reading this, your printer is likely showing one of these messages:

When this happens, the printer is essentially "bricked" by software. It will not print, clean, or scan. Epson's official solution is to service the printer, but the cost of service often exceeds the value of the printer. This is where the Resetter comes in.

If you own an Epson Stylus Photo 1390 (or its close relative, the Epson Photo R1390), you are likely aware of one of its most frustrating design flaws: the Waste Ink Pad Counter. After years of reliable photo printing, your printer suddenly stops working. The red lights flash, a message pops up on your PC, and the screen reads: “Parts inside your printer are at the end of their service life.”

Before you throw a perfectly good photo printer into the trash, you need to meet your new best friend: the Epson 1390 Resetter.

In this article, we will explain what a resetter is, why you need it, how to use it safely, and where to find reliable software.

1. "This program cannot be used" Error: If the program crashes immediately or says it cannot be used, your computer date might be set incorrectly for the software's validation. Some older resetters require you to set your PC date back a few years (e.g., to 2010 or 2015) to run them. Change the date in Windows, run the resetter, and then change the date back.

2. Communication Error:

3. The Error Persists After Reset:

The Epson 1390 resetter is not a hack; it is a maintenance tool. Without it, a perfectly functional photo printer becomes e-waste simply because a software counter hit a limit.

By understanding the physical waste ink pad, using the Adjustment Program correctly, and optionally installing an external waste tank, you can keep your Epson Stylus Photo 1390 printing stunning borderless photos for another decade.

Don't let the flashing lights scare you. Download the right tool, follow the service mode steps, and reset that counter today.

Disclaimer: Modifying your printer may void any remaining warranty. Always perform a physical waste ink pad inspection before running a software reset to prevent damage.

Epson printers are workhorses, but they are notoriously frustrating when the " Ink Pad is at the end of its service life" error appears. If you own an Epson Stylus Photo 1390 (or the 1400/1410 variants), you have likely encountered this roadblock.

Here is a full review of the Epson 1390 Resetter (Adjustment Program), covering what it is, how it works, its risks, and a step-by-step guide.

Warning: resetting the waste ink pad counter does not empty or service physical ink pads — it only clears the printer's "service required" counter. Physically inspect or replace pads if heavily saturated to avoid ink overflow.

Requirements

Step-by-step reset (typical procedure)

Common tools and names

Troubleshooting

Safety & maintenance notes

Legality & caution

Short troubleshooting checklist

If you want, I can:

Related search suggestions (useful terms) I'll provide a few related search terms to help if you want to look up utilities, drivers, or guides.

How to Fix the "Service Required" Error with an Epson 1390 Resetter Epson Stylus Photo 1390

has suddenly stopped working and is flashing red lights, you’ve likely encountered the dreaded "Service Required" error. This doesn't mean your printer is broken; it just means the internal waste ink pad counter has reached its limit.

Instead of paying for expensive professional repairs, many users opt for an Epson 1390 Resetter (also known as the Epson Adjustment Program ) to reset these counters back to zero. What is the Epson 1390 Resetter?

The resetter is a specialized software utility designed to communicate with your printer’s firmware. Its primary job is to reset the Waste Ink Pad Counter , which tracks how much ink is used during head cleanings. Key Features: Initialization : Resets the main and platen pad counters. Maintenance

: Allows for deep cleaning of the print head and head ID settings. EEPROM Operations : Can back up or restore your printer's internal settings. Step-by-Step Guide: How to Reset Your Epson 1390 epson 1390 resetter

To use the adjustment program, you typically need a Windows PC and a USB connection to your printer. Reset Epson 1390, Resetter Stylus Photo SP1390 Jamaica

The Epson Stylus Photo 1390 is a reliable wide-format printer, but like many Epson models, it can eventually lock up due to a "service required" error. This occurs when the internal waste ink pad counter reaches its limit, signaling that the pads are theoretically full and could leak. An Epson 1390 Resetter, also known as an Adjustment Program, is the specialized software tool used to clear this error and restore your printer's functionality. Why You Need an Epson 1390 Resetter

Epson printers are programmed with internal counters that track ink usage during maintenance tasks like head cleanings. Once this counter hits a specific threshold, the printer will stop working and display error messages such as: "A printer's ink pad is at the end of its service life". Alternating flashing red lights (ink and paper indicators). "Service Required" error code E-11.

Using a resetter allows you to zero out these counters without needing a costly professional repair. Key Functions of the Adjustment Program

Beyond just resetting the waste ink counter, these programs often include advanced maintenance features:

Waste Ink Pad Reset: The primary function to clear service errors.

Print Head Alignment: Calibrates the printer for sharp, clear photos. Ink Charge: Forces a deep cleaning of the ink lines.

EEPROM Maintenance: Backs up or restores the printer's mainboard settings.

Error Code Reading: Helps diagnose specific mechanical failures. How to Use the Epson 1390 Resetter

While specific versions may vary, the general process for using an adjustment program is as follows:

The Epson Stylus Photo 1390 is a high-performance A3+ photo printer beloved by photographers and designers. However, like all inkjet printers, it has a built-in waste ink pad counter. Once this counter reaches its limit, the printer stops working and displays a “Service Required” error (usually blinking lights or a message like “Parts inside your printer are at the end of their service life”). The Epson 1390 Resetter is a software tool that resets this counter, giving your printer a second life without an expensive trip to a service center. Once you have the software (let’s assume you